Page 1
ASSEMBLY/INSTALL INSTRUCTIONS Can-Am X3 Bulkhead Gusset Kit PART #: C-110S, C-110S-RAW Your package should come with the following: (6) 4130 Gusset Kit Pieces (6) M12-1.75 x 90MM 12-POINT FLANGE BOLT (12) M12 DIN 125A FLAT WASHER (6) M12-1.75 NYLON INSERT LOCKNUT (2) M10-1.5 X 25MM 12-POINT FLANGE BOLT...
Page 2
12. Remove the 10mm hardware at the front of the chassis and remove the upper and lower plates behind the bulkhead/chassis. 13. Now, we will move onto assembling the Tatum UTV gusset kit onto the car. 14. First, start by installing FIGURE A onto the front of the car with the welded-on bung side facing the car.
Page 3
Congratulations! You have successfully completed your Tatum UTV upgrade! We cannot wait to see your build on Instagram & Facebook. Follow and tag us @TatumUTV. If you have any questions or concerns with your order, please email sales@tatumutv.com.