www.mymemorism.com CONTENTS Introduction ···································································01 Important Safety Instructions ·······································01 Battery Recycling ··························································02 Parts Identi cations ······················································02 Speci cation ··································································03 Charging Methods ························································03 LED Indicator Description ············································04 How to Use ····································································05 Cleaning and Maintenance ··········································07 Danger ···········································································07 Limited Warranty ··························································08...
INTRODUCTION Congratulations on your purchase and welcome to Memorism! To fully bene t from the support that Memorism offers, please register your product at www.mymemorism.com/register. IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should always be observed, including the following. Read all instructions before using this appliance.
www.mymemorism.com BATTERY RECYCLING When your rechargeable clipper reaches the end of its useful life, the Lithium-ion batteries must be removed and recycled or disposed of properly in accordance with your local and state requirements. PARTS IDENTIFICATIONS...
www.mymemorism.com SPECIFICATIONS Product Name Hair Clipper Set Model Motor Battery Type 2000mAh Li-ion Charging Time 3 hours Running Time 4 hours Input: 100-240V 50-60Hz 0.2A Adapter Output: 5.0V 1000mA Weight 7.9 oz Size 6.7 x 2.6 x 1.5 inches CHARGING METHODS 1.
www.mymemorism.com 6. If the clipper has not been used for a month or longer, it is advisable to recharge it for 3 hours. 7. Charge the clipper at temperatures between 34 F-104 8. Clipper can be used by connecting the charging cable when the clipper is out of battery.
www.mymemorism.com HOW TO USE On / Off / Speed Power ON: Press the button once. Power OFF: Hold the button for 2 seconds. Speed Adjustment: Every time you press, it will change to different cutting speed. Cutting Length Adjustment 1. Adjust blade length Push the adjust switch to adjust the blade length.
Page 8
www.mymemorism.com Remove Guide Comb Pull the snap tab on the back of the guide comb. Slide the guide comb out. Note: Do not press the comb teeth as this may damage the comb. Remove Blade Press the adjust switch to the bottom. Hold the main body, place your thumb against the blade and then push the blade away from the main body.
www.mymemorism.com CLEANING AND MAINTENANCE Turn off the Clipper and brush off any hair trimmings from the main body and from around the blade. Remove the blade and clean the blade under running water with the cleaning brush after each use. Dry the blade and drop oil on to the cutters by the points.
Need help?
Do you have a question about the CS7 and is the answer not in the manual?
Questions and answers