Summary of Contents for matter BOLON
- Page 1 CLEANING & MAINTENANCE Matter Surfaces | +1 212 252 2049 | info@mattersurfaces.com | mattersurfaces.com...
- Page 2 ZEROING. Matter Surfaces | +1 212 252 2049 | info@mattersurfaces.com | mattersurfaces.com...
- Page 3 4. Leave to work for 5-10 minutes, without allowing it to dry. 5. Rinse twice with clean water using the scrubberdryer—or until it stops forming a lather. Matter Surfaces | +1 212 252 2049 | info@mattersurfaces.com | mattersurfaces.com...
- Page 4 Replace the SuperZorb pad when it becomes too dirty or wet. 6. Do not leave a dirty SuperZorb pad to dry by itself before washing. The SuperZorb pads should preferably be tumble-dried. Matter Surfaces | +1 212 252 2049 | info@mattersurfaces.com | mattersurfaces.com...
- Page 5 250 ft 5. In extremely dirty conditions, a nylon brush may be appropriate to loosen the dirt. Afterwards, the dirt is absorbed according to the earlier description. Matter Surfaces | +1 212 252 2049 | info@mattersurfaces.com | mattersurfaces.com...
- Page 6 5–10 minutes. Scrub it again and absorb the water with a soft microfiber cloth or a wet vacuum cleaner. Rinse with clean water and wipe the floor until all cleaner is removed. Matter Surfaces | +1 212 252 2049 | info@mattersurfaces.com | mattersurfaces.com...
- Page 7 I-gum machine (if available), hot water (160–210°F), steam or freeze spray Indentation from furniture Hot water (160–210°F) Candle wax Melt with hot water (160–210°F) and absorb with a microfiber cloth Matter Surfaces | +1 212 252 2049 | info@mattersurfaces.com | mattersurfaces.com...
Need help?
Do you have a question about the BOLON and is the answer not in the manual?
Questions and answers