Do you have a question about the DH13.V2 and is the answer not in the manual?
Questions and answers
John White
March 10, 2025
My thermostat is OK but compressor does not run
1 comments:
Mr. Anderson
March 10, 2025
The compressor on the Baridi DH13.V2 thermostat may not be running because the set temperature has already been reached, causing it to stop working. Other possible reasons include the unit not being plugged in, a fuse or circuit breaker failure, or the temperature control being incorrectly set.
Baridi 40l drinks mini fridge with led light, black and glass door (6 pages)
Summary of Contents for baridi DH13.V2
Page 1
Thermostat Lock & Key & Light Model No. DH13.V2 Thank you for purchasing a Baridi product from the Dellonda range. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
Page 2
Important Information Please read these instructions carefully and note any safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.
Page 3
Class E. • Check that the door is properly closed, sealed • SPECIFICATION and level before tightening all screws. • Model no: DH13.V2 • OPERATION • Temperature range: 3-10°C • The temperature control dial is accessed • Rated current: 0.6A inside the unit in the upper right corner.
Page 4
• Slide out the bulb cover and put it somewhere safe. (Fig. 2). Fig. 2 • MAINTENANCE • Remove the power plug from the supply when performing cleaning or maintenance. • Carefully unscrew the bulb (anti clockwise) • DO NOT use abrasive or chemical cleaning until it comes away from the unit (Fig.
Page 5
• Slide the bulb cover back into the slot until you hear a ‘click’ (Fig. 5) Fig. 5 • Connect the unit back up to the power supply, switch on and test. • TROUBLESHOOTING Symptom Solution Unit does not operate. Not plugged in.
Page 6
No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim. Dellonda Limited, Sole UK Distributor of Baridi Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757575 support@dellonda.co.uk...
Need help?
Do you have a question about the DH13.V2 and is the answer not in the manual?
Questions and answers
My thermostat is OK but compressor does not run
The compressor on the Baridi DH13.V2 thermostat may not be running because the set temperature has already been reached, causing it to stop working. Other possible reasons include the unit not being plugged in, a fuse or circuit breaker failure, or the temperature control being incorrectly set.
This answer is automatically generated