Advertisement
Quick Links
Advertisement
Summary of Contents for Bacteo Tower BT0H10S10
- Page 1 User Manual Model: BT0H10S10 www.bacteo.com...
-
Page 2: General Safety Instructions
2. Do not enter the room during the disinfection process. Avoid any exposure to direct or reflected UV-C light when disinfection is in progress. 3. Do not operate Bacteo Tower if any part of the unit is damaged or cracked, or if the plug or cord are damaged. - Page 3 It emits UV-C light, which kills bacteria, viruses and other micro-organisms on the illuminated surfaces. It is intended for indoors use only. Bacteo Tower is only compatible with Philips TUV PL-L 95W/4P HO 1CT/25 lamp, DO NOT use any substitutes or non-original lamps, as it may cause damage to the unit, as well as cause shock or fire hazard.
- Page 4 Getting the lamp and the room ready: Place the lamp in the middle of the room on a smooth, flat, level surface, preferably away from direct sunlight. Plug the lamp into an outlet. When the Bacteo Tower is plugged into the electrical outlet, the LED indicator will light...
- Page 5 Remove animals from the room before starting the disinfection. It is recommended to hide plans from direct exposure of the UV-C light, cover them, or remove them from the room. Close the window curtains. Note: • If it’s a hassle to remove plants from the room, you can just cover them with cloth before the disinfection.
- Page 6 2. STARTING THE DESINFECTION Touch and hold the button. Light indicators around the button will light up in a sequence and the lamp will make a beep. Green LED indicator will light up on the right side of the main interface.
- Page 7 Beginning the disinfection. After you have selected the size/duration, get ready to initiate the disinfection process and immediately leave the room. You will have 10 seconds to leave the room - but don‘t worry, the lamp will not start the disinfection process as long as there is movement in the room.
- Page 8 4. MOTION DETECTION AND PERSONAL SAFETY Bacteo Tower has a 360° motion detection sensor for extra safety. When disinfection is in progress, any motion in proximity of the lamp will stop the disinfection process - the lamp will begin to continuously beep and orange LED indicator will blink.
- Page 9 Only objects that are directly illuminated by the lamp are disinfected. If there are obstacles between the lamp and the objects you wish to disinfect, disinfection efficiency may be reduced. Place the Bacteo Tower on a flat, level surface for most effective UV-C disinfection. Disinfection time should be increased: •...
- Page 10 (tree movement from wind, birds, etc.). Motion detection may not be effective if the are obstacles between the Bacteo Tower and the moving object. Place the Bacteo Tower on a flat, level surface for most effective motion detection.
-
Page 11: Technical Specifications
• If none of the above factors are present – it could mean a malfunction with the sensor. Please contact us at www.bacteo.com/support for further help. TECHNICAL SPECIFICATIONS Bacteo Tower UV-C lamp Tower weight and size: 3.8kg / 8.4lb / 28x28x75 cm / Useful Life: 9000 h 11x11x29,5"...
Need help?
Do you have a question about the BT0H10S10 and is the answer not in the manual?
Questions and answers