STAND STEADY TRFLMN55WHWH Instruction Manual

[f]
MANUAL SIT-STAND DESK
Instruction Manual
STAND STEADY
TRFLMN55WHWH/TRFLMN55BLBL/
TRFLMN55BLSV / TRFLMNSSCHBL /
TRFLMN55AMBL
I Instructions of Safety and Warnings:
• Any failure to comply with the safety and installation instructions in this manual may cause serious bodily injury.
• Any incomplete observation of the instructions, warnings and additional information marked with the "Note"
",&"
and may result in serious damage to the system or its components.
• This product can be used by children aged from 8 years and above if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Persons with reduced physical, mental abilities and or lack of experience and knowledge must not use the
product, unless they're under supervision, understand the hazards involved or they have been thoroughly
instructed in the use of the apparatus by a person who is responsible for the safety of these persons.
• Users should make sure that they never sit on the desktop in order to prevent serious bodily injury .
.&,
Other Safety Instructions:
CAUTION
• Clear up all obstacles within the height adjustment range.
• Any attempts to reconstruct the desk frame aren't allowed.
• Don't add anything to the adjustable junctions of the desk frame.
-
• Outdoor use is prohibited.
Disposal: The product with this mark indicates that this product shouldn't be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your
used device, please use the local recycle service or contact your point of purchase to withdrawn the product.
I Checklist and Installation
· - H
Please check all of the components shown in the component checklist. If any of the components are missing or damaged,
contact your point of purchase for a replacement.
Lifting Column
D
t
Crossbar
5-A (x4)
Hex Head Screw
What tools are needed to
assemble the desk frame?
What important specifications
should know before installation?

1. Inserting the Sync Rod

• Place two Lifting Columns
Attach the right column to the right end of the sync rod. Precisely adjust the hole on the
right column to aiign with the sync rod using a Crank Handle
B (x1)
Sync Rod
(x1) E (x1)
Desktop
==::J - -
@:)::,
s-c
5-B (x6)
(x4)
Phillips Head Screw Hex Head Screw
�
s::, �
R
Weight Capacity
L_j
Oas
shown. insert left end of the Sync Rod
Left Column
C (X1)
Crossbar
F (x1)
Crank Handle
5-D (x9) 5-E (x6) 5-F (x1)
Siiicone Pad Washer Ailen Wrench
_,,/ Phiilips Screwdriver
Bubble Leve!
<$,,"e
fi
Operation Temperature
40kg (881bs) (-5 ° C-+40 ° C)
O
into the ieft column.
G.