Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for Shenzhen Hyan Microelectronics Ddiaper HY-NP-01
- Page 1 The use manual Product name: Ddiaper Mode: HY-NP-01 FCC ID: 2AFETHY-NP-01...
- Page 2 一： APP installation and use 1：The customers can go to install APP software by scanning the following two-dimensional code Open the APP, add one baby and edit the information, upload the photo of the baby’s. 3:If We connect the Ddiaper with the handset by BT ,We can gain the information about baby from the Software Icon display of the diaper status: The icon shows warning, it express the APP and the smart diaper is not connect...
- Page 3 二：Product use 1:the Product is composed by the sensor and the host, as follows Sensor the host 2: Take the sensor out of the packing box and then tear it off along with the dotted line. 3: There are three Velcros on the packing box, stick the velcros on the diaper with the circle velcros on the packing box, stretch the other side of the diaper and stick it to the square Velcros on the other side of diaper.
- Page 4 4: Remove cotton material from the three touch spots on sensor and exposed of them. Removes cotton material from the other two holes, too. 5; Remove the cotton material from the triangle part on the other side of the sensor and exposed of part of release paper 6 Peel off the release paper to the dotted line 7;...
- Page 5 8: Correspond the location holes on the host with the holes on the sensor, three touch spots on the host is correspond with the metal plate on the sensor 9: Press the host cover tightly to fix the sensor. 10: Press the switch in back side of host..If flash one time, that means the connection is successful. If flash three times，that means the connection is failed, and need to re-connect again.
- Page 6 12: Put the diaper (which with host and sensor) on baby and adjust elastic band FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Ddiaper HY-NP-01 and is the answer not in the manual?
Questions and answers