The ITC-4001 loop Attenuator, provided with this kit will reduce excessive D>C> loop current without degrading the voice or data quality of the line. Additional ITC-4001 Attenuators may be ordered from Independent Technologies. YOUR LOOP CURRENT TEST SET PERFORMS SEVERAL DIFFERENT CIRCUIT TESTS A.
Page 3
USING YOUR TEST SET A. LOOP CURRENT TERMINATION TEST: 1. Set the POWER SWITCH to the OFF position 2. Disconnect the premise equipment from the C.O. line. 3. Connect the C.O. line to the test set. a. To test modular systems (AT&T Merlin, etc.), plug b.
Page 4
A minus sign on the screen indicates that the “tip” and “ring” connections to the test set are reversed (This may indicate a system problem). 6. D.C. loop current readings in the 23 to 35 ma range are acceptable. Proceed to the “In Line” test. D.C.
WARRANTY Independent Technologies, Inc. warrants the Loop Current Test Set against all defects in material and workmanship for a period of one full year from the date of original purchase subject to the...
Page 6
50% of current replacement cost. YOUR ITC-3004 LOOP CURRENT TEST KIT CONTAINS: (1) Loop Current Test Set (2) 3001A Alligator Clip Cord (3) 4001 Loop Current Attenuator...