Download Print this page

Aeroe Spider Rear Rack Manual

Advertisement

Quick Links

Thanks for choosing
We hope that this is the start of a long and happy relationship that will enable you to use your bike
more often, for more adventures in an easier and more enjoyable way.
If you're like us and tend to skip the instructions and just start putting it together. . . . . . we understand.
However if you would like some help getting set up, below are some important and handy tips and
tricks for installing your aeroe gear.
All you need to install any of our products is a standard 5mm allen key. Take a moment to familiarise
yourself with some of the jargon below shown on the spider rear rack. The following steps will then
allow you to get setup quickly and easily so you can get out and start enjoying your new gear!
spider rear rack 'feet' and 'straps' to
connect to seat stays
spider rear rack 'cradle' which can
be located on top or sides of rack
(or both). Cradle come with in built
'cradle straps' for easy use.
'spider rear rack'
Tool required for install - '5mm allen key'
We love seeing and hearing about your adven-
tures around the world. . . . . . if you want to reach
out or still need installation help - we would love
to hear from you! You can reach us at
team@aeroe.com or on facebook and instagram
#aeroebikepack or check out aeroe.com for
more information.
Thanks again from the aeroe team!

Advertisement

loading
Need help?

Need help?

Do you have a question about the Spider Rear Rack and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Aeroe Spider Rear Rack

  • Page 1 All you need to install any of our products is a standard 5mm allen key. Take a moment to familiarise yourself with some of the jargon below shown on the spider rear rack. The following steps will then allow you to get setup quickly and easily so you can get out and start enjoying your new gear! spider rear rack ‘cradle’...
  • Page 2 Depending on the size of your bike or seat, you can loosen the bolts shown above By now your rack should be securely installed and look something like this, and ready to and slide the spider rear rack down to suit preferred height, and then tighten the have the cradle/s installed.