Advertisement
Quick Links
Advertisement
Summary of Contents for Raft MinerVa MV7
- Page 1 Service Manual V2.0 24012022...
- Page 2 ● 1. Quick Troubleshooting Checklist ● ● ●...
-
Page 3: Quick Troubleshooting Checklist
● 1. Quick Troubleshooting Checklist Before contacting the support team it may be helpful to attempt to resolve some common issues by first following this list of solutions. However, please do not hesitate to contact the support team if these solutions do not resolve your error. Please follow all safety precautions before attempting what is described here. - Page 4 ● mining pools may have a similar address but the port number (ex. 1800) may differ. stratum+tcp://[pool address]:[port number] 9. Check that the worker name is correct. The worker name should be in the format of: MinervaLab.default1 where usually ‘MinervaLab’ is your account name, there is a full stop after the account name, and then followed by ‘default1’.
-
Page 5: On/Off Switch
● Power supply – C20 Socket – On/Off switch Fans Control Panel Figure 1. Minerva MV7 Miner Overview C20 socket at the miner C19 plug Figure 2. Where to Connect the Power Cable ● ● ●... - Page 6 ● 2.2 Control Panel Overview 2.2.1 What options does the Control Panel provide? The following figure shows a more detailed view of the Control Panel first shown in Figure 1. The Control Panel contains the following components: IP Report button Reset button Red indicator light Green indicator light...
- Page 7 ● 2.2.2 What do the LED indicators mean? The following table can be used to decode the indicator lights on the miner. Which will inform the user of the current working status of the miner, and if there is an error. IP Report button Reset button Red indicator light...
- Page 8 ● 2.3 Solutions to Common Errors 2.3.1 How do I Reboot the Miner? To reboot the miner, please access the Reboot page from the web interface sidebar and then press the Reboot button on the Reboot page. Figure 5. Reboot Screen on the Minerva Web Interface 2.3.2 How do I Restore the Miner to Original Settings? The reset button is used to restore the miner to factory settings.
- Page 9 ● 2.3.3 How do I Configure my Mining Pool? Figure 7. Accessing the Pools Management Page on the Web Interface 1. Click on Configuration -> Pools on the left side menu of the interface, shown in the image above: 2. Click the Add Pool button and input the mining URL, worker number and password mining pool turn.
- Page 10 ● machine will automatically load the new mining pool configuration and restart the mining program. Caution: The mining device will choose one of the mining pools to mine. The last running mining pool cannot be deleted. 2.3.4 How do I Verify I am Connected to the Mining Pool? This can be done by viewing your chosen mining pools dashboard, or by looking on the miners web interface.
- Page 11 ● 2.3.5 How do I Find the Miner’s IP Address? Once the MV7 miner is properly connected and powered on, you need to determine the IP address of the miner before configuration. There are several methods of doing so as follows: 1.
- Page 12 ● 1. As shown in the above image, open Miner Manager on your computer, jump to the Miner page, and click on the Register Miner button. 2. Press the IP report button on the control panel of the miner, release the button when the red indicator lights up.
- Page 13 ● 2.3.6 How do I upgrade the firmware on my miner? 1. Click on Configuration -> Upgrade on the left side menu of the interface, shown in the image below: Figure 11. Upgrading the Firmware using the Miners Web Interface 2.
-
Page 14: Additional Support
● 3. Additional Support Still having trouble setting up your miner, or something is not working? Please reach out to our support team by sending us a detailed description of the issue at servicedesk@lakeparime.com. ● ● ●...