Advertisement
Quick Links
Advertisement
Related Manuals for H2O Degree WM-1300C
Summary of Contents for H2O Degree WM-1300C
- Page 1 Installation & Instruction Manual WM-1300C Cold Water Meter...
- Page 2 Before installing your new H2O Degree product, please read the information on the following pages carefully. We believe that you will find the H2O Degree water meters easy to install and use for monitoring and managing your water and utility consumption.
- Page 3 Introduction These instructions detail the installation of the H2O Degree WM-1300C Cold Water Meter. Your H2O Degree package includes (1) WM-1300C water meter. H2O Degree WM-1300C Cold Water Meter The WM-1300C is a no-lead, brass positive displacement water meter capable of both horizontal and vertical installation.
-
Page 4: Pre-Installation Information
Pre-Installation Information Pre-Installation Information Before beginning the installation of the H2O Degree WM-1300C cold water meter validate that the meter is the proper size for the application. Also verify that the meter is the proper type for the installation (hot or cold). - Page 5 Pre-Installation Information Prior to installing the WM-1300C positive displacement water meter the following steps must be followed: 1. Flush the service line upstream of the meter to remove any dirt or debris. 2. A ball valve should be installed for easy meter change out (not included with meter package).
-
Page 6: Meter Installation
Meter Installation 1. Place the meter in the water line. Arrows indicate direction of the flow. 2. Tighten only as required to seat. Do not overtighten. 3. Slowly & carefully release air from line. NOTE: Opening valve too quickly can damage the meter. a. - Page 7 Five Year Limited Warranty Subject to the exclusions listed below, H2O Degree will either repair or replace (at its option) any product that it manufactures and which contains a defect in material or workmanship. The following exclusions apply: 1. This Limited Warranty is effective for the time periods outlined in the chart to the left. The warranty is valid from the date of manufacture when installed in accordance with manufacturer’s instructions by qualified personnel.
- Page 8 H2O Degree 3580 Progress Drive, Suite L Bensalem, PA 19020 (215) 788-8485 • info@h2odegree.com www.h2odegree.com...