Advertisement
Initial Setup
Charging
Fully charge your tablet for at least six hours before initial
use. The battery icon at the upper right corner of the
screen indicates the battery level or charging status.
1.
Plug the small end of the USB cable into the micro
USB port on the side of the device, and then plug the
larger USB end into the power adapter.
2.
Once fully charged, disconnect the device from the
charger. Unplug the charger from the device first, and
then unplug it from the electric outlet.
NOTE: Use the included charging accessories to optimize
your battery performance.
Powering On
To turn on your tablet, press and hold the power key for
approximately two seconds. The Core Innovations logo
indicates that the tablet is loading.
1.
When you turn on your tablet for the first time, the
Installer Wizard appears. Select the apps you wish
to install on your tablet and follow the on-screen
instructions.
2.
It may take several minutes for your tablet to install
the apps; please be patient.
To turn off your tablet, press and hold the power button,
and then tap Power off on the pop-up screen.
NOTE: If you choose not to install the apps provided by
Advertisement
