Advertisement
Quick Links
Advertisement
Related Manuals for Changtaiwei Electronics K-12
Summary of Contents for Changtaiwei Electronics K-12
- Page 1 K-12 Walkie Talkie User Guide...
- Page 2 Read this operating instruction carefully before using your two way radio, including the part on Product Safety and Important Notice. CAUTION 9. Up Button . Antenna 2. Volume Knob 10.Menu/Power Button Backlit LCD Display 11.Call/Lock Button NOAA/Scan Button 12. PTT(Pull to talk) Button Down Button 13.
- Page 3 Product Features TECHNICAL PARAMETERS Product number K-12 Frequency range Channel number Channel spacing 12 5KHz Working voltage 4.5V ± Frequency stability 2 5ppm Operating temperature range -10 ~40 ℃ ℃ The antenna impedance 50Ω Overall dimensions 165 57 41mm Weight...
-
Page 4: Product Features
Product Features Backlit LCD Display Features • 22 Channels • 10 Channel NOAA All Hazards Radio • Weather Alert • 142 Privacy Codes (38 CTCSS codes/104 DCS codes) • Hands-Free Operation (VOX) • Vibration Alarm Silent Paging • Scan Battery Level Indicator Channels,privacy codes Roger Beep Icon VOX Icon... - Page 5 Installing Batteries To install or replace batteries: Remove the belt clip by pulling the tab and sliding it Pull the battery door down to release the battery cover. Insert 3 "AA" batteries. Put the battery cover back into place. Snap the lock tab and belt clip back into place.
-
Page 6: Turning On Your Radio
Quick Start 1. Press and hold the Menu/Power button to turn on your radio. 2. Press the Menu, Press the Up or Down button to select a channel. Both radios must be tuned to the same channel/privacy code to communicate. 3. - Page 7 To Select a Channel With the radio on, select any of the 22 channels by pressing enu and the Up or Down button. Both radios must be tuned to the same channel/privacy code to communicate. Channel Number Listening for a Response Release the PTT button to receive incoming transmissions.
- Page 8 Scrolling Through the Menu Function By scrolling through the MENU function, you will be able to select or turn on preferred features of your radio. When scrolling through the Menu function, your radio features will be displayed in the same predetermined order: Set Channels Set CTCSS Privacy Codes Set DCS Privacy Codes...
- Page 9 Set CTCSS Privacy Codes To select a CTCSS privacy code: 1. After selecting a channel, press the Menu/Power button until the CTCSS icon appears and the small numbers next to the channel number flash on the display. If DCS is turned on at the channel selected,the display will flash the CTCSS icon and “OFF.”To switch from DCS to CTCSS, press the Up or Down button while the display is flashing “OFF.”...
- Page 10 Voice Activated Transmit (VOX) In VOX mode, your radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To set VOX sensitivity: 1.
- Page 11 Ten Call Tone Settings You can choose between ten different Call Tone Settings to transmit a call alert. To change a call tone setting: 1. Press the Menu/Power button until the letter “C” and the current call tone number (001 through 010) is displayed.
- Page 12 Key Tone On/Off When Key Tone is On,the Key Tone icon will be displayed, an audible tone will sound each time a button is pressed. To turn key tone on or off: 1. Press the Menu/Power button until the Roger Beep icon is displayed.
- Page 13 Channel Scan Your radio can automatically scan channels. To scan channels: 1. Press and release the Scan button until the Scan icon and the channel numbers appear on the display. 2. Press and hold the Scan button to begin scanning channels.
- Page 14 Press and hold the PTT button to communicate on that channel/ privacy code. Your radio will remain on that channel/privacy code and return to Standby mode. Press the Up or Down button to resume scanning privacy codes. If you do not press any button within 10 seconds, your radio will automatically resume scanning privacy codes.
- Page 15 3. Press and hold the Weather/Scan button again to save the new setting and exit the Weather Alert Mode and return to Standby mode. This radio is rain resistant to JIS4 standards. FCC Statement This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules.