Advertisement
Advertisement
Table of Contents
Summary of Contents for Sixpack Millenium
- Page 1 User Manual Direct Mount Stem...
-
Page 2: Table Of Contents
Content Intended use Compatibility Guarantee / Crash Replacement Mounting the stem After a crash Care and maintenance... -
Page 3: Intended Use
Intended use Guarantee / Crash Replacement The Sixpack Millenium direct mount stem is designed for categorie 5 The statutory warranty applies to all components. If according to ASTM F2043. damage occurs outside the warranty, contact us and we try to find an individual solution. -
Page 4: Mounting The Stem
Mounting the stem Clean and degrease the clamping surface of the handlebar and stem. Disassemble the handlebar clamps and attach the stem to the fork crown. Screw in the two rear screws (C) and tighten them to a maximum torque of 9 Nm. Put the handlebar on the stem and thread the handlebar clamps from the outside to the inside of the handlebar. -
Page 5: After A Crash 10
If you have any doubts or questions, you must seek the help of a • Replace your stem in case of deformations or deep scratches! trained bicycle mechanic or the Sixpack Service! • After a heavy crash, overstressing of the stem and thus a reduction in mechanical strength is possible.
Need help?
Do you have a question about the Millenium and is the answer not in the manual?
Questions and answers