Page 1
Pulse Quick Installation Guide 1. Mount the device on a 35 mm DIN rail. 2. Connect the inputs to the individual channels of the device according to the polarity shown on the enclosure label. Version 1 - February 2021...
Page 2
3. Screw the power supply wires to the device (100~240 VAC 50/60 Hz). 4. Statuses, colours and behaviour of the diodes: A. LoRaWAN diode (if the device is properly connected): Device is working correctly (power and memory) - GREEN colour Device is working incorrectly (power and memory) - RED colour LoRaWAN frame sent - single WHITE flash Confirmation from server after receiving the frame - single WHITE flash...