Summary of Contents for ECF Innostor Plus ROTATING LARDER PLUS
Page 1
ROTATING LARDER PLUS - 300mm Assembly and fitting instructions IMPORTANT - The unit has a maximum loading limit of 100kg. Load should be evenly distributed across all trays with maximum load capacity for each tray not exceeding 16kg. All fixings supplied must be used for installation. No lubricant should be used on the runners.
Page 2
Draw a pencil centre line on cabinet top. Measure and mark 4 screw fixing positions. Screw top runner to cabinet top.. Views from below Attach top channel to top frame using screws (K). Extend top frame to allow fitting of top tray. Attach tray mounting clips.
Page 3
Raise the frame and insert the swivel pin from above Use grub screws on forward and rear frame uprights to and secure from below with the ‘O’ ring. adjust frame height to allow for smooth slide action. Fit adjustment screws to Fit door brackets to frame Offer door to frame.
Page 4
Adjust vertical door alignment with the Adjust the horizontal and lateral door alignment 4 door bracket screws. with screws on the door brackets. Attach the remaining tray mounting clips to the frame and insert the trays. IMPORTANT - The unit has a maximum loading limit of 100kg. Load should be evenly distributed across all trays with maximum load capacity for each tray not exceeding 16kg.