SINOLIFT ETM Series Operating Manual

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ETM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for SINOLIFT ETM Series

  • Page 2 INTRODUCTION INTRODUCTION Welcome to use our ETM Series Electric Tractor. Your Tractor is designed for a durable, reliable and easy operation. It could be easily used in any place such as airport, factory, warehouse, supermarket and distribution center, saving energy and time without any pollution to working environment.
  • Page 3 BEFORE OPERATION BEFORE BEFORE BEFORE OPERATION OPERATION OPERATION Operating Operating Element Element Operating Operating Element Element...
  • Page 4 Read and understand Operator’s Manual before using the truck. Make sure that the battery cable connector is fully engaged into the battery compartment of the truck. Check if there is full of battery supply. Check if the truck is working properly. Give special attention to horn, speed controller and steering system.
  • Page 5 Turn off the switch to cut off the battery power supply. Disconnect the battery cable connector from compartment of the truck and then fully plug the charge port cord into the charge port on the charger. Before connecting the battery charger to the local power supply, check and insure that the voltage of both is the same.
  • Page 6 ETM S S S S pecifications: pecifications: pecifications: pecifications: Model ETM-50 ETM-100 ETM-150 Capacity 500kg 1000kg 1500kg Battery 2x12V/40Ah 2x12V/70Ah 3x12V/70Ah Charger 24V/10A 24V/10A 36V/10A Drive motor 24V/400W 24V/800W 36V/1200W Ø260x90mm Ø310x127mm Ø310x127mm Drive wheel 10x3.50-4 13x5.00-6 13x5.00-6 Rear wheel Ø75x32mm Ø75x32mm Ø100x32mm...

This manual is also suitable for:

Etm-50Etm-100Etm-150

Table of Contents