Envirowise QF130V Operating Manual

Envirowise QF130V Operating Manual

Supply inline fan

Advertisement

IMPORTANT INSTRUCTIONS -
QF130V
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN
THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock and
WARNING:
OF FIRE, ELECTRIC SHOCK AND INJURY TO
PERSON, OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you
have questions, contact the manufacturer.
b) Before servicing or cleaning the unit, switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
WARNING:
OF FIRE, ELECTRIC SHOCK AND INJURY TO
PERSON, OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-related construction.
b) Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent back drafting. Follow the heating equipment
manufacturer's guideline and safety standards such as those
published by the National Fire Protection Association (NFPA)
and the American Society for Heating, Refrigeration, and Air
Conditioning Engineers (ASHRAE), and the local code authorities.
c) When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
18-HE118D1-1-EN
6727931 Rev. C 10-17
OPERATING MANUAL
INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL SAFETY INFORMATION
injury to person, including the following:
TO REDUCE THE RISK
TO REDUCE THE RISK
Installing Contractor:
Installation Date:
Model Number: QF130V
SAVE THESE INSTRUCTIONS
CAUTION:
ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR
EXPLOSIVE MATERIALS AND VAPORS.
d) This unit must be grounded.
e) To avoid motor bearing damage and noisy and/or unbalanced impellers,
keep drywall spray, construction dust, etc. off power unit.
f) Read all instructions before installing or using exhaust fan.
g) For residential installations only.
h) Must use suitable weather hood with insect screen to protect air
intake.
WARNING:
FIRE, ELECTRIC SHOCK, DO NOT USE THIS FAN
WITH ANY SOLID-STATE SPEED CONTROL
DEVICE.
a) Must be connected to a GFCI (ground fault circuit interrupter)
protected branch circuit.
WARNING:
WARNING:
STRONG EFFECT ON THE AIR FLOW, NOISE AND ENERGY
USE OF THE FAN. USE THE SHORTEST, STRAIGHTEST DUCT ROUTING
POSSIBLE FOR BEST PERFORMANCE, AND AVOID INSTALLING THE FAN
WITH SMALLER DUCTS THAN RECOMMENDED. INSULATION AROUND
THE DUCTS CAN REDUCE ENERGY LOSS AND INHIBIT MOLD GROWTH.
Supply Inline Fan
.
FOR GENERAL VENTILATING USE
TO REDUCE THE RISK OF
DO NOT USE IN KITCHENS.
THE DUCTING FROM THIS FAN HAS A
1 of 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QF130V and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Envirowise QF130V

  • Page 1 WITH SMALLER DUCTS THAN RECOMMENDED. INSULATION AROUND wiring and other hidden utilities. THE DUCTS CAN REDUCE ENERGY LOSS AND INHIBIT MOLD GROWTH. Installing Contractor: Installation Date: Model Number: QF130V SAVE THESE INSTRUCTIONS 18-HE118D1-1-EN 6727931 Rev. C 10-17 1 of 8...
  • Page 2 Direct Intake Insulation around the ducts is required if QF130V is installed in non-conditioned space and is Direct Intake: The unit is mounted in a recommended for all installations to reduce energy loss and inhibit mold growth...
  • Page 3 NOTE: The 24V relay works in conjunction with the unit mounted programmable controller installed Compartment Screw on the QF130V and wall mounted thermostats that contain ventilation logic software. For the unit Cover to operate, it must be energized at the controller location connected by the 24V relay and meet the preset criteria programmed into the unit mounted programmable controller.
  • Page 4: Operation

    Onboard controller information to the unit. An optional motorized damper can be connected to the unit. The damper is connected via a 24V transformer that plugs into the receptacle in the RELAY PANEL ENVIROWISE Q130V ENVIROWISE Q130V unit (Figure 14). TCONT850/1050 824 COMFORT CONTROL...
  • Page 5: Using The Controller

    SECTION 13 ENERGY SAVING MODE NOTE: This unit is equipped with Use and Care Controller Setttings an Energy Saving Mode that allows CAUTION: you to configure upper and lower MAKE SURE POWER IS SWITCHED OFF AT High Temperature Range 65° - 95 F limits for temperature and humidity.
  • Page 6: Troubleshooting Guide

    Troubleshooting Guide Trouble Probable Cause Suggested Remedy 1. Fan does not operate. Control setting. Check temperature and humidity level settings. If the intake air is not within the preset range, the fan will not turn on. Either adjust the settings or wait for the intake air temperature and/or humidity to change.
  • Page 7: Replacement Parts

    REPLACEMENT PARTS Qty. Description Replacement Part # Mounting Brackets E1650001 6" Metal Collar (Intake) E1650002 6" Metal Collar (Outlet) E1650003 Blower Assembly E1650102 Wire Compartment Assembly E1650101 Adjustment Knobs E1299802 Unit Mounted Programmable Controller E1650004 Air Filter (2-pack) E1650123 Relay Box E1650021 6727931 Rev.
  • Page 8 NOTES: 18-HE118D1-1-EN 6727931 Rev. C 10-17 8 of 8...

Table of Contents