MTV-54G15H POWER ZOOM CAMERA INSTRUCTION
SPECIFICATION (RoHS Conform)
MODE NO.
TV SYSTEM
IMAGE SENSOR
CCD TOTAL PIXELS
SCANNING SYSTEM
525 lines, 60 fields/sec
SYNC SYSTEM
MINIMUM
Typical
ILLUMINATION
Star light Mode
RESOLUTION
S / N RATIO
48dB ( MIN ) / 52dB ( TYP )
WHITE BALANCE
WHITE BALANCE RANGE
B.L.C. FUNCTION
GAMMA CORRECTION
AGC
ALC
IMAGE NEGATIVE
MONTION DETECT
CROSS LINE
ON/OFF Select by OSD menu (position adj. by software)
FREEZE FUNCTION
ELECTRONIC SHUTTER
AES : 1/60(1/50) ~ 1/120,000 sec. / MANUAL : 8 step
10X Optical ZOOM LENS ,F1.8(W)~2.9(T),f=4.2mm(W)~42mm(T)
Diagonal
LENS
Hor.
Ver.
ZOOM
FOCUS
POSITION
VIDEO OUTPUT
CONTROL FUNCTION
OSD CONTROL
Zoom, Focus, IRIS, WB, AGC, Position, C-Gain, APC Gain
OSD LANGUAGE SELECT
COMMUNICATION BAUD RATE
OPERATION TEMPERATURE
OPERATIONAL HUMIDITY
POWER SUPPLY
DIMENSIONS
* The specifications and appearance of the product may changed without notice.
Variovision, Pöttinger Straße 23, DE-82041 Oberhaching, www.variovision.tv
MTV-54G15HN
MTV-54G15HP
NTSC
PAL
1/4-inch CCD Image Sensor
811(H) X 508(V)
795(H) X 596(V)
625 lines, 50 fields/sec
Internal
2.5 Lux
( F1.8, 5600ºK) 50IRE
0.07 Lux
( F1.8, 5600ºK ) 50IRE
520 TVL
(AGC OFF , r=1 , APC OFF , Y-OUT)
ATW / AWB / FIX
3200 ~ 9600 ºK
Super BLC,48 zone BLC
0.45 /1
AUTO (24dB max)
AUTO / FIX
Select by OSD menu
48 zone (select by OSD)
Alarm in trigger or Select by OSD
W( 56.4º ) / T( 6.1º )
W( 46.4º ) / T( 4.9º )
W( 35.6º ) / T( 3.7º )
100X (10X Optical 10X Digital)
Auto / Manual
64 Position (Zoom , Focus)
Composite & Y/C output 1.0Vp-p at 75 ohm
RS-232C (With Driver) , OSD control
ENGLISH / CHINESS_Simp / JAPANESE
9600 BPS
-10° C - 50° C
within 85 ﹪ RH
DC12V1V / 3.6W(Max)
62mm X 36.8mm X 43.8mm
MTV-54G15HP
2655A
1/16
Dimension (Unit : mm / 0.5mm)
Caution for Installation
1. Avoid places where there is direct sunlight. When using the camera outside.
2. Be careful, never let any water in this equipment.
3. Do not directly touch the CCD element. If necessary, use a soft cloth moistened with alcohol to wipe off
the dust.
4. When the camera installs in dust or wet environment, please puts into the camera housing.
5. Be extra careful not to shake the camera.
6. Avoid places where temperatures exceed 50° C or more
7. When any abnormalities occur, make sure to unplug the unit and contact your local dealer.
8. The camera are only operated with regulative adaptor DC 12V, AC to DC non-regulative adaptor may
cause camera damaged.
Variovision, Pöttinger Straße 23, DE-82041 Oberhaching, www.variovision.tv
MTV-54G15HP
2655A
2/16