Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for SonopTek SR-1C
- Page 1 SR-1C Wireless Rectal scanner’s Guider...
-
Page 2: Section 1 Introduction
With the probe be connected through Wi-Fi and the App is running, enjoy your days of working without the trouble making cables. This manual is intended to provide a through overview of the SR-1C Scanner and should be carefully read before starting operating the device. -
Page 3: Specifications
SR-1C Wireless Rectal scanner’s Guider 1.1. Specifications Display: iPad Probe: 6.5MHz Linear array Depth: 40 – 100mm Scanner Mode: Linear Array Transducer Length: 60mm Display Mode: B/BM/Color/PDI/PW Gray Scale: 256 levels Battery last: 7.5hours Size: 180mm x 50mm x 20mm Weight: 0.4 Kg... -
Page 4: Section 2 Getting Started
2.1. Unpacking The SR-1C Scanner is carefully packed to prevent damage during shipment. Before unpacking, please note any visible damage to the outside of the shipping containers. Items should be checked in order to ensure that all ordered items have been received. The following table lists the items which should be received with each particular system. -
Page 5: Starting Probe
SR-1C Wireless Rectal scanner’s Guider 2.3. Starting Probe Figure 2-1 SR-1C Wireless Rectal Probe ①---Wireless Connection Indicator ②----Battery Capacity Indicator ③----Button for Power ON/Off &Live/Freeze ④--Change scanning depth ⑤--Gain up Gain down ⑥ The Wireless Connection Indicator and the Battery Capacity Indicator on the probe may be invisible before the probe is turned on. -
Page 6: Wireless Connection
When the probe is waiting for a wireless connection as described in previously, launch the Settings of iPad, turn on the Wi-Fi (if not on), Find the SSID of the probe. The SSID is like: “SR-1C GVBGCA001”, the suffix after “SR-1C:” is a code generated from Serial Number. Connect to the SSID with the password same as the Serial Number (in lower case). -
Page 7: Section 3 App Operations
SR-1C Wireless Rectal scanner’s Guider Section 3 APP Operations The manual is instructed on an iPad based, at this stage Model SR-1C can work with ipad only 3.1. Scanning screen Figure 3-1 Main Screen... -
Page 8: Scanning Setting
SR-1C Wireless Rectal scanner’s Guider After the probe is connected, launch the App, the Main Screen will show similar in Figure 3-1. (No image is visible when the App is firstly launched.) Attention: All the buttons on the main screen can be pressed when it is lighted. -
Page 9: Scanning Mode Setting
SR-1C Wireless Rectal scanner’s Guider 4 Focus Position is provided in this system, press the area, position number will change from 1 to 4, simultaneously the position moving point will change(Part 4 in main screen). Dynamic Range can be adjusted from 40 to 110 by pressing the area. -
Page 10: Application Setting
SR-1C Wireless Rectal scanner’s Guider Press each model to start scanning. The most frequently modes to be used for rectal application, are B, Color and PW. B modes show black and white image, Color to show more on blood fluid, PW to show heart beat. - Page 11 SR-1C Wireless Rectal scanner’s Guider Figure 3-7 Channel setting 3.3. Save image & video When image is showing in image area, press button 18 to save the current image to album, saved imaged can be browsed in the album of the mobile device.
-
Page 12: Section 4 Maintenance
SR-1C Wireless Rectal scanner’s Guider Click part 15 to make notes on the image. Click part 16 to show a grid on the image, Click part 17 to clear the notes and measurement on the image. Click 18 t save image with measurements and notes. -
Page 13: Waterproof Ipad
SR-1C Wireless Rectal scanner’s Guider When in charging, the battery indicator will be blinking and the grids indicate the capacity of the battery charged. If four grids all light and the indicator not blinking means the battery is fully charged.
Need help?
Do you have a question about the SR-1C and is the answer not in the manual?
Questions and answers