Advertisement
Calling
Answer a call: Short press MFB (L/R)
Hang up a call: Long press MFB(L/R) for 2s during a call
Reject a Call: Long press MFB(L/R) for 2s
Activate voice assistant
Long press MFB( L/R ) for 2s to activate Siri or Google assistant,double click MFB( L/R ) will close
voice assistant
Resetting The Device
Please follow the below steps in case the earbuds don't auto pair
Step 1: Remove "PLX5" from the list of paired devices
Step 2: L/R earphones in the charging case and in charging mode,long press L/R MFB for 5s will
clear the device pairing record,and thered & white LED will quick flash 3 times
Step 3: Take out both earbuds from the case,they will now auto pairwith each other
LED Indicator guide
Status
Power On
Power Off
TWS During Pairing Status
TWS Pairing Successful
Connected With Device
Earphone Battery Low
Earphone Charging
Earphone Fully Charged
Attention Please
Fully charge before use.
Do not press any key for pairing. earphones will go to pairing mode automatically after took out.
Put the earphones in CORRECT POSITION for charging.
‐ If the battery is not replaced properly, there will be explosion risk. The battery can only be
replaced with the same type or equivalent type of battery. It is not recommended to replace the
Description
White LED flash light one time
Red LED flash light one time
Red and white lights
willflashing alternate
Red and white lights will slow
flashing alternate
N/A
The red LED flash twice on
every 30 seconds
Red LED will bright all the time
when the earphones
ischarging
Red LED will lighting‐off
Voice Prompt
"Power On"
"Power Off"
"Pairing"
"Pairing"
"Connected"
"Battery Low"
N/A
N/A
Advertisement
