iTec Home Z-Wave Pan/Tilt Camera Gateway Quick Start Manual

iTec Home Z-Wave Pan/Tilt Camera Gateway Quick Start Guide
Package Contents
Setting up the Gateway
'Allow' to receive
Open the app
notifications from
and click + to
start the gateway the
setup wizard. connected Z-Wave
Follow the on devices.
screen prompts. anytime in phone
setting
Notifications.
Adding Rooms
Click 'Room' then +.
Name room. Click room
icon to select a picture .
Up to 40 rooms can be
created.
Click 'Next' for basic
gateway 'How To'
guide or 'Skip' to
camera &
continue set up.
j
Click then 'Help'
Change
to return to the tour
at a later time.
>
Adding Devices
Click 'Device' then + and
select the brand or 'other
Z Wave device' from the
list & follow the on screen
instructions, follow device
m a n u f a c t u r e r s
instructions
inclusion/adding device.
www.iTechome.co.uk
Product View
Click 'Set up a new
gateway' then
select 'Pan/Tilt
camera gateway'
and follow the
instructions.
Name device and assign to a room. Click
eg low battery, motion alarm, temp. etc (depending on the device ).
If device does not function correctly remove and re-add. Click the
device at any time to change settings.
Gateway reports device status as INACTIVE after 48hrs without
communication with the device (eg out of range or no power).
for
Configuration menu is for advanced users only.
Name your gateway then click the house icon
to log in. Type admin in the account field and
the password from the ID card found in the
box. NB There are different passwords for
video access and gateway admin settings.
App shows device
real time status
to choose notifications,