Technical parameter: Bathroom Heater Product Name Rated voltage 220-240V〜 730310 | 730311 Model Rated frequency 50Hz Appliance Type Class Rated power 2035W Degree of protec�on IPX0 (when wall-mounted) Standards:IEC 60335-1 IEC 60335-2-30 IEC 60335-2-80 Product structure diagram Air inlet Air outlet 口...
Installation Check whether all parts are complete before using. (1) Determine the installa�on loca�on: When using this product on a wall, install it at the height required by the user (the air outlet is at least 100cm from the ground, and the top air inlet is at least 30cm from the ceiling), and it must be far away from the shower head and bathtub, as shown in Figure 1.
Instructions Plug in the power plug, touch the power icon “ ”, and hear a beep, the heater turns on. Touch the Heater I icon " " the heater will work at 1000W. Touch the Heater II icon " ", the heater will work at 2000W. Touch the Fan icon "...
Page 5
Precautions Before using the product, please check whether the power supply you are using meets the requirements of the nameplate, and pay attention to the rated current of the socket above 10A. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
the power plug. Turn off the power before unplugging the plug; do not pull the power cord, but pull the power plug, otherwise it may cause short circuit, fire, electric shock and other hazards. Ensure that the fan is switched off from the supply mains before removing the guard. Common malfunctions Problem Possible cause of the problem...