Advertisement
Quick Links
Induction gear heater ZNCK Series
ACEPOM gear heater ZNCK series :
Jingjiang ACEPOM instrument are professional in researching, producing and
saling of induction heater. The new ZNCK series bearing induction heater,
mainly used for heating metal bearings, gears, bushings, bushing, ring, pulley,
shrinkage, etc. various types of connectors, through heating can be expanded
to achieve a assembly needs. With heat sink design, better heat dissipation.
ZNCK series gear heater to heat the gear etc in walls thicker workpiece is
special, imported cold rolled silicon steel sheet, made of pure copper coils, *
domestic first-class gear induced bearing heater, designed for heating gear
wall thicker artifacts such as design, high heating efficiency, fast speed, an
average of more than ten seconds can be heated up a small gear, also can
match manipulator used on assembly line.
1
Advertisement
Summary of Contents for ACEPOM ZNCK Series
- Page 1 With heat sink design, better heat dissipation. ZNCK series gear heater to heat the gear etc in walls thicker workpiece is special, imported cold rolled silicon steel sheet, made of pure copper coils, *...
- Page 2 Features of ZNCK series gear induction heater 1.Particularly designed for heating workpieces with thick walls. 2.Adjustable power, demagnetization automatically. 3.High efficiency for heating. 4.Environment-friendly, making no pollution. 5.Power and time saving, make assembly easy and well. 6.Easy to operate, uniformly heating without risk of fire.
- Page 3 ZNCK series gear heater operation guide: 1.Control box and main machine should be installed in proper place.The left and right directions of the main engine should be horizontal, and the front and rear vertical directions are allowed to tilt backward no more than 3 degrees.
- Page 4 4. After the work is completed, turn the power switch to the stop position and cut off the power.At this point, the end of debugging, can be put into use.