Induction gear heater ZNCK Series
ACEPOM gear heater ZNCK series :
Jingjiang ACEPOM instrument are professional in researching, producing and
saling of induction heater. The new ZNCK series bearing induction heater,
mainly used for heating metal bearings, gears, bushings, bushing, ring, pulley,
shrinkage, etc. various types of connectors, through heating can be expanded
to achieve a assembly needs. With heat sink design, better heat dissipation.
ZNCK series gear heater to heat the gear etc in walls thicker workpiece is
special, imported cold rolled silicon steel sheet, made of pure copper coils, *
domestic first-class gear induced bearing heater, designed for heating gear
wall thicker artifacts such as design, high heating efficiency, fast speed, an
average of more than ten seconds can be heated up a small gear, also can
match manipulator used on assembly line.
1