Download Print this page

Master Garden BC-46S Assembly Instructions

Download this manual

Master Garden Products.

1-800-574-7248

Bamboo Solid Arm Chair. BC-46S

Important Note: Do Not tighten the bolts until you have all of them in place. Use the Pre-

Drilled holes and hand tighten to hold its place.

1. Verify you have received all required pieces of your Bamboo Arm Chair. BC-46S comes

with six (6) chair components, eight (8) screws, and one (1) tightening tool.

2. Now place side 1 on the ground with the side with 4 larger holes facing up. Side 1 is

indicated with a number 1. Next take the leg supports and match their numbers up. Be

sure to get the bamboo knobs on the supports to go into the holes on side 1.

Page 1 Important Note: Do Not tighten the bolts until you have all of them in place. Use the Pre- Drilled holes and hand tighten to hold its place. 1. Verify you have received all required pieces of your Bamboo Arm Chair. BC-46S comes with six (6) chair components, eight (8) screws, and one (1) tightening tool.
Page 2 3. Next, fit the seat and back pieces into the holes by matching the numbers. Note: you may have to force the knobs into the holes by movement or by a rubber mallet. 4. Finally take the final side and work the knobs into the holes on side 2. Take 4 screws and place them in the 4 holes along the side.