Hide thumbs Also See for EP-5:

Advertisement

Quick Links

Owners Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EP-5 and is the answer not in the manual?

Questions and answers

Summary of Contents for Geckoplex EP-5

  • Page 1 Owners Manual...
  • Page 2 On top of the vintage sound and feel, the Geckoplex is also imbued with some more modern features. To name a few, it comes complete with a...
  • Page 3: Top Panel

    The WET output signal is a mix of the dry input from the instrument mixed with the wet effects generated by the Geckoplex. In a single amp setup, this is the output that should be used.
  • Page 4: Front Panel

    Front Panel Description GAIN adjusts the preamp gain of the input signal from the IN jack. Level Meter displays the current audio signal level. DELAY adjusts the delay time between echoes. Effects Controls adjusts the effect settings. ON switch toggles the effect on or off. Delay Flasher flashes the current time between echoes.
  • Page 5 Gain and Switches GAIN controls the analog input preamp gain. The preamp is always on even when the ON switch is toggled off in order to maintain a constant signal level. The setting can affect the echo saturation somewhat, but for the most part this control has little influence on the effects.
  • Page 6 Effect Control Knobs The DELAY slider controls the time between echoes, between a minimum of 50 milliseconds at the far left, and a maximum of 2 seconds at the far right. This control is motorized. Its position will automatically move when using the TAP Tempo switch to set the delay, and also when presets are activated and change the delay time.
  • Page 7 Presets The Geckoplex EP-5 has 3 fully programmable presets which can be cycled through by pressing the PRESET switch. The number of LEDs lit above the switch indicates which preset is currently active. Each preset can be used with an expression pedal to make it variable.
  • Page 8: Preset Programming

    Preset Programming This page describes the procedure for programming a preset. Important Notes: Programming does not require an expression pedal to be plugged in, and if ● one is it will not affect the the programming process in any way. The input GAIN knob and toggle switches are not controlled by presets.
  • Page 9: Sound On Sound

    Sound on Sound The Geckoplex includes a Sound on Sound (SOS) mode that allows looping playback of up to 40 seconds of audio. Overview: Press and hold the ON switch for 2 seconds to toggle in or out of SOS mode.
  • Page 10: Example Settings

    Example Settings Slapback A single echo will be heard for each note played. With very short delay times this produces a thicker chorus-like sound. With longer delay times this can double each note, giving the impression that it was played twice. Spacious Ambiance Reverb combined with very fast echoes (delay slider all the way to the left)
  • Page 11: Troubleshooting

    Sit down, maybe grab a cold beverage, and User becomes speechless or focus on breathing as the full magnificence enters an unresponsive state of the Geckoplex settles in. of amazement Also, congratulate yourself for reading all the way to the end of this manual.
  • Page 12 edal geckopedals.com...

Table of Contents