Specifications - Zieaz LCA1 Instruction Manual

Table of Contents

Advertisement

Acoustic Principle:
Active Electronics:
Directional Pattern:
Frequency Range:
Output Impedance:
Sensitivity:
Equivalent Noise:
Maximum Output:
Dynamic Range:
Maximum SPL:
Signal/Noise:
Power Requirement:
Output Connection:
Net Weight:
ECO Data:
Progressive evaluation/benchmark and
ECO-chemical rebalancing.
United Nations 17 Sustainable
Development Goals (SDGs):

Specifications

Corporate Social Responsibility (CSR) information:
Condenser capsule;
17mm backplate; 18mm diaphragm. 135V
(±5V) Externally polarised.
JFET impedance converter with
OP-Amp buffer: OPA1612 SoundPlus™.
Cardioid
20Hz ~ 20,000Hz (see graph)
Less than 30 ohms. Typical about
22ohms.
25mV/Pa @ 94dB SPL. ±4dB @ 1Khz.
Individual data sheet available.
4dB A-weight (Equivalent to perceived
noise).
14dB Z-weight (Linear / full spectrum).
+16.2dBu (@ 1kHz, 1% THD into 1kΩ).
> 135dB
139dB (@ 1kHz, 1% THD into 1kΩ).
90dB SPL.
Phantom P48
19 pin HDMI®. See pin schematic for 3-
pin XLR connection. Requires a Zieaz™
HDMI to XLR patch cable for use with
standard music equipment.
182 Grams; about 170g of Brass
(CuZn40Pb2/CW617N). Other materials:
about 12g (grid, plug, electronics etc.).
https://lca.earth/
development, planned ready before
2023) .
https://eco-tracking.lca.earth/?
vies=DK32208746
Goal 12: Ensure sustainable consumption
and production patterns.
See our company participation at:
https://zieaz.net/sdg1-17
4 of 25
(Site under
v1.0 January. 2022

Advertisement

Table of Contents
loading

Table of Contents