charby KEVLAR User Manual

Charby Sense is designed so that each LED color tells you a
different charging status, which you might not know when
using other cables.
White LED - Power On
Indicates the power is switched on, this helps you identify if
the power source is defective or if the power has been
switched on correctly.
Orange LED - Smart Charging
Indicates that your device is being charged normally.
LED pulses
LED pulses when below optimum charging speed (< 0.6A) is
detected. This helps you identify power sources that are not
supplying optimum charging speed. It is advisable to switch
on Charge Booster mode if you are charging on a laptop; or
switch to another power source so your phone can charge
at optimum speed.
*Charging speed of all smartphone/tablet automatically slows down
when battery level is close to 0% or 100%, thus it is normal for the
LED to pulse when you plug in at near zero or full charge.
Green LED - Auto Cut-Off
This cable automatically disconnects the power source to your
device after the battery is full.
*It might take around 30 minutes to an hour for the auto cut-off to
set in (indicated by green LED) as your phone is not at actual full
charge when it displays 100% battery level. It will cut off when your
phone is charged to the actual 100% (limit set by manufacturer).
Purple LED - Charge Booster
Press the button located at the side of the USB-A connector
when charging on a laptop USB port to disable data transfer
and instantly double the charging speed. Press the button
again to enable data transfer.
*2x speed up only works on USB port with data transfer capability
such as those on laptops or Macbooks.
*Activating Charge Booster while charging on wall charger might
slows down charging on some smartphone as it cuts off data
transmission that is needed for proprietary fast charging feature.
Charby Sense automatically chooses the fastest charging option
when it is connected to a wall charger or power bank, hence it is
not required to switch on the Charge Booster mode.
Charge Booster supported devices:
Charge Booster function is compatible on Samsung, Apple,
Nokia, HTC, LG, ZTE, Blackberry, MOTO, Sony, Meizu, OnePlus,
Huawei and other android devices. It does not support Oppo
and Vivo devices.
Extra Tips
*Data-transfer-friendly mode: Long press the button for 2s, and the
LED color will turn white. The Auto cut-off feature will then be
disabled, so you can use USB tethering or data transfer without auto
disconnection.
*All mode resets to the default smart charging mode when the USB
connector is unplugged or when the power source is switched off.
Website: www.charbycharge.com
Email: support@charbycharge.com