Do you have a question about the Ferrex 706193 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for ALDI Ferrex 706193
Page 1
706193 13W ENGRAVING TOOL Product Info Read all safety warnings and all instructions thoroughly before operating this product. Ensure you keep your manual in a safe place for future reference. IM ed 4; 07/2021...
Page 2
Try it out now Just scan the QR code with your smartphone and Product find out more about the Aldi product you have Info purchased*. * Depending on your tarif you may be charged for the connection.
Page 3
13W Engraving Tool Warranty details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION. The product is guaranteed to be free from defects in workmanship and parts for a period of 36 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
Contents Pack contents /parts Description of symbols General safety warnings Parts List Operation Maintenance Warranty FAQ/Troubleshooting Technical specifications...
Pack contents / parts Congratulations on the purchase of your Ferrex® 13W Engraving Tool. When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified.
Description of symbols Description of symbols The instruction manual or rating plate on your product may show symbols. These represent important information about the product or instructions on its use. To reduce the risk of injury, user must read instruction manual Wear ear protection Wear eye protection Wear breathing protection...
General safety warnings WARNING: Read all safety warnings, instructions, illustrations and Failure to follow all specifications provided with this power tool. instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool”...
Page 8
3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Page 9
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
13W Engraving Tool Parts List Engraving tip Carrying loop Tip release cap Power cord On/off switch Stencil x 4 Stroke adjustment dial AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PER13G1.A • 07/2021 • 706193 (toll free)
1) Before using the engraver you must ensure there is an engraving tip (1) installed correctly. (see Replacing the Engraver Tip on page 10) AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: PER13G1.A • 07/2021 • 706193...
Page 12
It is therefore not suitable for engraving electronic media such as CDs, DVDs, etc. These materials and their readability could be damaged. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PER13G1.A • 07/2021 • 706193 (toll free)
3) Tighten the tip release cap (2) fully by rotating it in a clockwise direction. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: PER13G1.A • 07/2021 • 706193...
Page 14
Reduce residual risks by using the 13W Engraving Tool with care and following all safety notes as well as other instructions. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PER13G1.A • 07/2021 • 706193 (toll free)
Tighten the tip release or detached. not tightened. cap (2). For other issues not covered in this chart, please call Customer Service on 1300 889 028. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PER13G1.A • 07/2021 • 706193 (toll free)
165*45*65 mm This 13W Engraver complies with the following Standards: Safety: IEC 62841-1 AS/NZS 62841.1 EMC: EN 55014-1 EN 55014-2 EN 61000-3-2 EN 61000-3-3 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 (toll free) MODEL No.: PER13G1.A • 07/2021 • 706193...
Page 20
If you are not entirely satis ed with this product, please return it to your nearest ALDI store, within 60 days from the date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline.
Need help?
Do you have a question about the Ferrex 706193 and is the answer not in the manual?
Questions and answers