Quick Containers LED Sensor Light Instructions

Shipping Container
LED Sensor Light Instructions
Model: LED Sensor Light Input Voltage: USB 5V
Figure 1: Product Pack
Introduction
Thank you for choosing your container light from Quick Containers! This motion sensor LED light has an extra strong
magnetic back allowing for easy fixing to a shipping container roof or wall. A sticky back strip is also included if using in
non-magnetic storage spaces such as a lined or aluminum container. This can make moving and working inside a
shipping container much safer and easier, especially in poor light and winter months.
This LED light has a combination of 2 automatic sensor modes, it can be set to activate just using the motion sensor, or it
can activate from either the motion or light sensor using wireless PIR technology. Fitted with a 120 degree motion
sensor that will be activated from approx. 10ft/3m of motion detected. The light will automatically turn off after 20
seconds of no motion. We recommend 1 lighting unit per 10ft of container length.
Featuring a built in lithium battery which can be charged directly by USB cable (included), the light has ultra-high
conversion efficiency enabling the battery life to serve 30,000 hours. Re-charge when light starts to go dim.