Download Print this page

Tyba Muse Quick Start Manual

Hide thumbs Also See for Muse:

Installation

Setup

To start the setup process it is important Muse is correctly connected:

•

Connect Muse to a power source using the supplied 12V PSU

•

Connect Muse to your local network using the LAN1 port on the rear of the unit

•

Muse is set to DHCP as default. Using a web browser you can browse to Muse via the hostname

http://museserver.local

•

Using a network scanner, search your network to find the DHCP address Muse has been assigned

If you are using the hostname to locate Muse on your local network it is important that both your computer and Muse are

on the same subnet and VLAN.

You will be prompted to enter a username and password to access the Muse web interface:

Username: muse

Password: museadministration

Muse - Quick Start Guide

Table of Contents

Do you have a question about the Muse and is the answer not in the manual?

Page 1 Using a network scanner, search your network to find the DHCP address Muse has been assigned If you are using the hostname to locate Muse on your local network it is important that both your computer and Muse are on the same subnet and VLAN.
Page 2 Muse - Quick Start Guide Web Interface System The system section provides useful information on the health and status of the Muse system including OS version, server state, CPU usage, free memory, case temperature and system start date. Firmware Logs...
Page 3 The network section provides the ability to configure the network setup for the Muse system. By default Muse uses the primary LAN1 interface set as DHCP. Should you wish to set Muse to a static IP address you can change the configuration type to Static and fill in the required fields.
Page 4 It is important that you set library to apply replay gain to the tracks stored on Muse. After the sample rate to match the sample rate you have set for Muse the scan has completed, all tracks on Muse will be normalised in Dante Controller.
Page 5 Internal When set to internal, Muse will locate the audio files on the When set to NFS, Muse will locate the audio files on an NFS internal storage. share. You will be prompted to supply the IP address as well as the path to the NFS share location.