DC GENERATORS V4 AutoGen Manual

Advertisement

DC Generators
Manual Notes V4 - 12/24/48v DC Generators
*** Please view all notes before starting your new V4 AutoGen Generator. ***

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V4 AutoGen and is the answer not in the manual?

Questions and answers

Summary of Contents for DC GENERATORS V4 AutoGen

  • Page 1 DC Generators Manual Notes V4 - 12/24/48v DC Generators *** Please view all notes before starting your new V4 AutoGen Generator. ***...
  • Page 2 Add lubrication oil to crankcase by removing Yellow screw plug. Above 32°F, use SAE 30. Below 40°F and down to -10°F, use 10W-30. Synthetic 5W-30 can be used in all temperatures. Oil should be changed after the first 20-30 hours of operation and every 100 hours of run time thereafter.
  • Page 3 To connect V2 AutoGen 12V/24v/48V controller to the internet, follow the steps below To connect V2 AutoGen 12V/24v/48V controller to the internet, you will need to provide an Access Point or Mobile Hotspot with SSID: AutoGenV2 and password: AutoGenV2 Updates or uploading new parameters can only be done whilst connected to the internet.
  • Page 4 To connect V2 AutoGen controller and link your unique QR Code to AutoGen app. 1. Download our app AutoGen . For Android. https://dcautogen.com/android For IOS. https://dcautogen.com/ios AutoGen DOWNLOAD 2. Create an account 3. Scan the qr code placed under the AutoGen controller. Please confirm you are able to view the monitor once you have completed this step.
  • Page 5 Note: If you notice a Red indicator on top right hand screen of app, review step 3 as this means that the controller is unable to access the internet. Auto Start/Stop Mode First step within the app is to scroll down to the bottom of the apps screen and adjust the battery bank calibrate slider as pictured below.
  • Page 6 Set your low battery bank voltage for when the generator should start. The V4 AutoGen controller will attempt to start the generator 3 times, for a 7sec period at each attempt, when battery bank has reached Low Set threshold from within the app.
  • Page 7 CYAN can you access the monitoring app. If there is no connection to internet or server, the V4 AutoGen Controller will continue to run in auto start/stop mode. If you require any further assistance please do not hesitate to ask dcautogen.com...

Table of Contents