Download Print this page

Advertisement

Quick Links

Introduction
We thank you very much for purchasing our product and hope that
the following notes will assist you in obtaining maximum benefit
from it.
The chair is designed to be used as a self-propelling, attendant
operated or a transit chair. All the parts being interchangeable to
facilitate simple change of operation should this be required. .
However the chair is only supplied in one configuration, depending
on your initial assessment, with the additional parts being
purchased separately.
Before each use inspect the chair to ensure it is free from defects.
Ensure the seat is set correctly for the user, refer to the Remove /
adjust flexi-seat section of this manual.
We advise that vulnerable service users are not left unattended to
use this equipment.
Model Type
Ref:
Description
7700
Osprey Options Stainless Steel Shower/Sani Chair – Self
Propelled
7710
Osprey Options Stainless Steel Shower/Sani Chair –
Attendant Operated
7712
Osprey Options Stainless Steel Shower/Sani Chair –
Transit
Safe Working Load (SWL)
The standard range / model types are tested to a SWL of 150Kgs (330lbs).
Please note that "special" custom built chairs may vary according to
individual service user requirements.
The SWL is marked on each chair as part of the product labelling
information.
Warranty
We are pleased to offer a standard warranty of 5 years on stainless steel
frames (with 2 years on all other components) from the date of purchase. It
is subject to the following general terms and conditions:
1. Should problems be experienced with any workmanship or
materials within the first 5 years on the stainless steel frame (and
the first 2 years on all other components) please contact your point
of purchase or Aidservice Ltd within normal working hours 9am –
5pm Monday to Friday)
2. Please quote the serial number of the product (where applicable),
which will be found on the front cover on this user guide or on the
product itself.
3. The product will be repaired free of charge provided that it has
been used in accordance with the guidelines and recommendations
set out in this user guide, and serviced and / or maintained by
Aidservice Ltd or a competent person(s) authorised by Aidservice
Ltd.
4. The warranty does not cover replacements; adjustments of repairs
arising from a
consequence of normal wear & tear, wilful damage of accidental
damage,
misuse, neglect or any cause, which is beyond the manufacturers
control.
5. The warranty also does not cover modifications or repairs made to
the product by unauthorised persons or the use of unauthorised
parts or any failure or malfunction due to incorrect and / or poor
workmanship on the part of any person, other than Aidservice Ltd
or a competent person(s) authorised by Aidservice Ltd.
6. This warranty does not affect your statutory consumer rights.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7700 and is the answer not in the manual?

Questions and answers

Summary of Contents for aidservice 7700

  • Page 1 However the chair is only supplied in one configuration, depending the first 2 years on all other components) please contact your point on your initial assessment, with the additional parts being of purchase or Aidservice Ltd within normal working hours 9am – purchased separately. 5pm Monday to Friday) Before each use inspect the chair to ensure it is free from defects.
  • Page 2 Description of the product Aidservice Ltd or competent person(s) authorised by Aidservice Ltd. Full Serial Number of the Product Warranty details are shown on the back of this user guide.
  • Page 3 Note: footrest will lock into position. Braked wheels & castors Attendant chairs are fitted with brake castors [identified by a red pedal]. Adjustment – Footrests This is a foot-operated brake. Note: Do not stand on the footrests as this may result in the chair tipping.
  • Page 4 Adjustment – Self Propelling Wheels Seat Type, Removal, Cleaning, Adjustment and Re-fitting. To change / adjust the size, height or position of the self-propelling Your chair is available with a choice of seat configurations and has been wheels, a 19mm spanner, socket and ratchet are required. provided with the seat type and style agreed during the initial assessment.
  • Page 5 The seat is adjustable in width to allow improved posture and Adjustment – Seat height. comfort. Please Note: Height adjustment can only be achieved when the chair is Ensure that the seat is set correctly for the user. not in use. Ensure that the gap in the “Flexiseat”...
  • Page 6 INFORMATION FOR THE STAINLESS your supplier for further details. STEEL OSPREY OPTIONS SHOWER/ SANI CHAIR Aidservice Limited is committed to a policy of continued product development, consequently we reserve the right to change or alter any specifications without prior notice. Aidservice Limited...

This manual is also suitable for:

77107712