Diagtools X-431 EURO TAB II Quick Start Manual

X-431 EURO TAB II Tablet
Data Transmission Port
(Reserved for add-on modules, and
other USB devices use only.)
Memory Card Slot
( To store the memory card
for storage extension.)
Ambient Light Sensor
Charging Indicator
(Red means Charging, and
Green means Fully Charged.)
Microphone
10.1" Touch Screen
Rear Camera
Audio Speaker
Adjustable Kickstand
( Flip out it to any angle and work comfortable
at your desk, or hang it on steering wheel.
Quick Start Guide
Type-C Charging Port
( Reserved for charging or transferring data.
Power/Screen
Lock Button
+ -
Volume Buttons
Microphone
Front Camera
Camera Flash
Audio Speaker
Charging Slot
( For charging the tablet via
)
placing it on the docking station)
DIAGTOOLS SIA, Pernavas 43A, Riga, Latvia, LV-1009, www.diagtools.lv, diagtools@diagtools.lv, +37129416069
Accessory Checklist
)
X-431 EURO TAB II Tablet
A tablet for showing
test results.
Power Adaptor
To supply power to the tablet
through connection to AC
outlet.
Private & Confidential Sheet
A piece of paper bearing
Product S/N and Verification
Code, which is required for
your VCI activation.
Non-16pin Adaptor Kit
(Optional. For different
vehicle diagnostic sockets, it
may be necessary to use one
of the connectors/adaptor
cables included within the
kit. For detailed non-16pin
connectors, please check the
package box)
All pictures and descriptions illustrated herein are for reference purpose
only and this Quick Start Guide is subject to change without notice.
Docking Station
VCI Device
See Section "Docking
A device for accessing
Station" .
vehicle data.
Battery Clamps Cable
Cigarette Lighter Cable
To provide power to the non-
To supply power to the non-
16pin connector through
16pin connector via vehicle's
connection to the vehicle's
cigarette lighter receptacle.
battery.
OBD I Adaptor Cable
OBDII Extension Cable
A converting cable for
To connect the VCI device
connecting non-16 pin
for extension purpose.
connector.
Thanks for choosing LAUNCH!
If you have any questions on the operation of the unit,
please contact DIAGTOOLS SIA customer support:
Address: Pernavas 43A, Riga, Latvia, LV-1009
Phone: +371 29416069 / +371 29417871
Email: diagtools@diagtools.lv