Page 1
MUD6 USB CONDENSER MICROPHONE USER MANUAL...
Page 2
GarageBand. The MUD6 offers premium quality audio recording with ease and mobility, and with its pivoting stand mount and 9.8 ft. (3-meter) USB cable, the MUD6 is a valuable kit for any project studio. FEATURES • Smooth, flat frequency response.
MUD6 FREQUENCY RESPONSE (SUPERCARDIOID) *Note:Specifications are subject to change. SPECIFICATIONS Type Back Electret Condenser Polar Pattern Supercardioid Frequency Response 30-18,000 Hz Sensitivity -38 dBV/Pa (12.6 mV) (at 1k Hz Open Circuit Voltage) Max. SPL >135 dB SPL Power Requirements USB 5V, 30 mA...
SYSTEM REQUIREMENTS USB 1.1 or 2.0, powered 64MB RAM (minimum) OPERATING SYSTEM Microsoft Windows 7 Microsoft Windows 10 Microsoft Windows 2000 Professional Edition Microsoft Windows XP Home / Professional Edition (service pack 1.0 or later, or use the USB audio driver update from Microsoft) Microsoft Windows Vista™...
USB Power Indicator Headphone Output Jack When it is lit up, it means the USB connec- 1/8-inch (3.5mm) stereo jack for connect- tion is done and MUD6 get the power from ing headphones or studio monitors. USB interface. USB connector...
INSTALLATION ON A TABLE Through optional table stand HM6, You may put the MUD6 on a table and do recording. ON A STAND By using a microphone stand, the MUD6 can be mounted on it for CONNECTIONS USB CONNECTOR recording.
*Notice: If the microphone level of MUD6 are too loud or not enough, please check your DAW software or refer to Trou- bleshooting page in this manual to adjust the level in Windows and Mac computer system.
USB AUDIO EQUIPMENT DRIVER If you encounter a problem, please check whether driver has been setup successfully. WINDOWS OPERATING SYSTEM Hit “Control Panel” >> Hit “Hardware and Sound”...
Page 10
*Notice: If there is already the green tick next to the MUD6 microphone symbol and the “Set Default” button is not able to be hit (dark gray color), the MUD6 has been selected as the default device successfully.
Page 11
Hit “Properties” >> hit “Level” tab to adjust the microphone input gain.
Page 12
*Notice: If there is already the green tick next to the MUD6 speaker symbol and the “Set Default” button is not able to be hit (dark gray color), the MUD6 has been selected as the default device successfully.
Page 13
Hit “Properties” >> hit “Level” tab to adjust the headphone output volume. After that, please use the headphone volume knob on the MUD6 to do real-time adjustment.
Page 14
MAC OS OPERATING SYSTEM Open the Sound Preference window from System Preferences. Select MUD6 from both the Input and Output tabs.
Page 15
Garage Band users: open Garage Band before plugging in the microphone to automatically select the USB device.
Page 16
USING THE DIRECT MONITOR MUD6 To turn direct monitoring on or off, open the Audio/MIDI Setup utility located in the Utility folder inside the Applications folder.
Page 17
MUD6 Now click the checkbox in the Thru column in Audio/MIDI Setup.
TROUBLESHOOTING Problem Solution No sound in Check the headphone volume control and microphone gain at headphones computer control panel. Windows: Microphone sound is too week Audio tab, click Volume under Record and turn up Microphone or distorted Gain Control. Mac: From System Preferences, Choose Sound, Select Input tab and turn up Input gain.
Perrycom will repair or replace the parts. This warranty is only for the product which selling by distributor or agent which authorized by Perrycom. However, the situation below is excluded in the warranty :...
Page 20
Contact Marketing and sales Perrycom +886-15995670339 tony_chang@ksyola.com...