Page 1
Speed Demon Pioneer Shifter and their Hybrid Versions HIGH PERFORMANCE PROTECTIVE EYEWEAR...
Page 2
CONTENTS Introduction Fit Adjustment Eyewear Components Care & Maintenance Lens Replacement Limited Warranty Lens Removal Lens Installation...
Page 3
Thank you for your purchase of the Fast Metal Speed Demon, Pioneer or Shifter eyewear protection system. This manual covers three of our American-Made models: Speed Demon, Pioneer, Shifter, and their hybrid variants. These lifestyle products provide many options to interchange lenses within seconds and the ability to replace them when needed.
EYEWEAR COMPONENTS The Pioneer model is designed for smaller faces. The Speed Demon and Shifter models fit larger faces. Speed Demon and Pioneer, or Shifter frames with interchangeable lenses (Speed Demon model shown)
Page 5
Scan the code below to go to our Lens Page Microfiber Pouch...
LENS REPLACEMENT WARNING: Lenses can only be changed using these instructions for the Speed Demon, Pioneer, or Shifter models. Other models made by Fast Metal may not offer the same technique. LENS REMOVAL . Place index finger of one hand...
Page 7
2. Flex nose bridge with index finger 3. Using your thumb, push the lens towards you while pushing the inside edge out of its groove from the back. of the lens out with the thumb as shown.
LENS REPLACEMENT (CONTINUED) LENS INSTALLATION 1. Hold frame and lens as shown and trail outside edge of the lens into the lens groove, pushing all the way to the back edge firm. Scan the code below to see our Lens Replacement Video...
Page 9
2. Use your thumbs to apply pressure around the 3. Work your way around the edges until all outside edge of the lens until you hear it pop into four corners of the lens are firmly snapped into groove. Make sure the lens is pressed in the back the frame.
Do not attempt this FRAME ADJUSTMENT on plastic frames If your Fast Metal glasses feel too tight around your ears, your primary adjustment should be to the front frame. Hold the frame in both hands and carefully flex the frame outward gently. Make a number of small adjustments checking the fit each time to see if the desired fit has been achieved.
TEMPLE ADJUSTMENT If needed, a second adjustment can be made to the narrow end of the eyewear temples. Gently grasp each side temple with one hand and make slight adjustments, checking for desired fit and comfort each time. Make similar adjustments to each side to preserve symmetry.
CARE & MAINTENANCE Fast Metal Speed Demon, Pioneer, and Shifter models come with a specially-woven Microfiber pouch for cleaning and storing. Using the soft bag will help preserve the superior optical quality of your Fast Metal lenses. Hand wash and air dry the bag regularly.
Page 13
Always use a microfiber cloth. Never use paper towels or other rough materials. Check your Fast Metal Speed Demon, Pioneer, or Shifter protective eyewear regularly to make sure the screws are tight. If you find one that is loose, tighten it gently with a small optical screwdriver.
LIMITED WARRANTY Fast Metal warranties the Speed Demon, Pioneer, and Shifter models up to 1 year from date of purchase for workmanship and defects. This warranty does not cover scratched lenses. Fast Metal does not warranty scratched lenses or damage resulting from improper care or excessive size adjustments.
Page 15
Any tampering, misuse or negligence in handling or use of the product renders the warranty void. Further, the warranty is void if at any time, the user, its agents, employees, or customers attempts to make any internal changes to any of the components of a product: If at any time the power supplied to any part of the product exceeds the rated tolerances: if any external device attached by the user, its agents, employees or customers creates conditions exceeding the tolerances of the product: OPERATION OF THE PRODUCT RENDERS THAT RENDERS THIS WARRANTY VOID WILL BE DEFINED TO INCLUDE ALL OF THE...
Page 16
Visit us at www.FastMetal.com or follow us on Facebook, Instagram and Twitter. Fast Metal is a registered trademark. Email: Orders@Fastmetal.com • U.S. Patents # 11,002,988, D898,093, D916,947, and other patents pending. Version: 6.2021...