Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for GOFLOW GOFLOW
- Page 1 INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
GETTING STARTED SETTING UP GOFLOW A. List of Contents B. Deploying GoFlow C. Inserting GoFlow Filters D. Mounting on Bicycle E. Adjusting Pump Set F. Connecting the Water Tube SETTING UP GOFLOW MAINTAINING GOFLOW G. Washing GoFlow Filters Scan here for video instructions H. -
Page 3: List Of Contents
LIST OF CONTENTS DEPLOYING GOFLOW Identify spot to deploy GoFlow. Open bag and unclip GoFlow from bag. Place GoFlow on stable ground. Ensure GoFlow rack frame legs (blue) are fully extended and locked in position. Rack frame TDS tester Rack frame legs... -
Page 4: Inserting Goflow Filters
Open top cover of filter housing tube. After deploying GoFlow rack, place bicycle between the wheel hub tightener. Insert GoFlow filter into filter housing. Tighten and adjust wheel hub tightener on to bicycle rear wheel hub end caps. Push filter into housing and ensure it is flushed to housing. -
Page 5: Adjusting Pump Set
ADJUSTING PUMP SET CONNECTING THE WATER TUBE With the bicycle centrally Pre-filter water tube is to be positioned, turn the pump connected to pump set using the set adjustment knob. quick connect fitting. The other end is to be placed into water source. The bicycle wheel should come into firm contact with the friction roller. -
Page 6: Maintaining Goflow
GoFlow is now ready to be used. MAINTAINING GOLFLOW Scan here for video instructions Note: To remove tubes from quick connect fitting, push the purple ring towards the metal nut, then pull tube out. -
Page 7: Washing Goflow Filters
How to wash filters Open top filter housing and remove silicone washer. Reinsert washed filter. Remove GoFlow filter slowly and carefully. It might be difficult to Place the silicone washer on top of remove due to the tight seal. the filter before closing the cover of... -
Page 8: Replacing Goflow Filters
• Filters are not longer as effective. How to replace filters Place the silicone washer on top of Open top filter housing and remove the filter before closing the cover of silicone washer and used filter. filter housing. Insert the new GoFlow filter into filter housing. -
Page 9: Prolonging Silicone Tube (In Pump Set) Lifespan
PROLONGING SILICONE TUBE Open the pump set, remove silicone tube and flip. (IN PUMP SET) LIFESPAN • The silicone tube in pump set is subjected to friction and is prone to wear. Apply silicone grease to the • It is recommended to prolong its lifespan by performing silicone tube and pump bearing. -
Page 10: Replacing Silicone Tube (In Pump Set)
REPLACING SILICONE TUBE Unplug the tube from both ends. (IN PUMP SET) • Consider replacing silicone tubes only after performing “9 | Prolonging Silicone Tube Lifespan”. • It is recommended to replace the tube every 6 months Apply silicone grease to the or when the silicone tube develops a leak. -
Page 11: Totally Dissolved Solids (Tds) Water Tester
TOTALLY DISSOLVED SOLIDS (TDS) WATER TESTER How to use TDS water tester • It is highly recommended to have the water source tested for contaminants by a laboratory prior to Fill a cup with about 1 inch of pre or post filtered water. -
Page 12: Checking Water Quality
CHECKING WATER QUALITY Place tester into the cup of water. Water quality is checked visually. The water level should be above the electrodes level line marker and below the water tester level line marker. If post-filtered water clarity is not Water tester level marker between “Very Clear”... - Page 13 goflow.org...
Need help?
Do you have a question about the GOFLOW and is the answer not in the manual?
Questions and answers