Advertisement
Quick Links
This Pole Includes
QUICKTIP™
ADAPTERS
This Prism Pole is designed for
versatility and compatible with any
QuickTip™ adapter to use with your
prism system or application.
Adapter Length
50-135 mm Most Prisms, Adjustable
50 mm
150 mm*
*NOTE:
The 07-2090-150 and 07-2090-135A are included with 07-4626-TM
Topographic Pole.
adhesive to secure adapter to tip of pole. If
you intend interchanging this pole with
other QuickTip adapter, you may choose
to use a permanent adhesive. Follow
instructions on chosen adhesive. Apply to
adapter's bottom 5/8-11 male end and
inner area of the female threads on pole
tip. Do not apply to flat surfaces of either
the adapter or pole tip.
IMPORTANT:
Read Before Using
Designed for
1010, 9300N, Zeiss Prisms 100 mm
GNSS Antenna
SitePro recommends
using an all-weather
IMPORTANT:
Lire avant usage
Height of Target
50- 35mm
07-2090-135A
07-2090-50A
-
07-2090-150
IMPORTANTE:
Leer antes de usar
Item#
Advertisement
Summary of Contents for Dave Whites SitePro QUICKTIP 07-2090-135A
- Page 1 This Pole Includes QUICKTIP™ ADAPTERS This Prism Pole is designed for versatility and compatible with any QuickTip™ adapter to use with your prism system or application. Adapter Length Designed for Height of Target Item# 50-135 mm Most Prisms, Adjustable 50- 35mm 07-2090-135A 50 mm 1010, 9300N, Zeiss Prisms 100 mm...
- Page 2 INTENDED USE Visit www.dwsitepro.com for more details about QuickTip Pole Adapters. Use the QuickTip Adapters on prism pole to achieve a target height of 150 mm. HEIGHT OF Simple to determine what adapter is TARGET needed for your type of prism: 150 150 mm mm minus your target height = length of adapter needed.