Contents Part 1 – Product Details 1.1 Product Introduction 1.2 Packing List 1.3 Keys and Indicator Light Instruction Part 2 – Specification Part 3 – Notice Before Using The Camera Part 4 – Starting Using The Camera 4.1 Download The "CloudEdge" App 4.2 Power On The Camera...
Part 1 – Product Details 1.1 Product Introduction Type-C USB Port Charging Indicator Light Photodiode DC-5V Working Status Speaker Indicator Light TF Card Slot Reset Key Lens Microphone IR LED Power Key 1.2 Packing List 1 * Battery 1 * Solar...
1.3 Keys and Indicator Light Instruction Camera Keys Operations Power Key Press and hold for 5s for power on/off the camera Power Key Quick press 1s to wake up the camera from standby mode Reset Key Press and hold for 5s to reset/restore to factory settings...
Part 2 – Specification Product Name Acelerar T1 Model DQ221 CloudEdge Power Supply 5V 1A WiFi Frequency Bands IEEE 802.11 b/g/n, 2.4GHz Battery Type Li-ion Battery Capacity 14400mAh/3.7V Standby Life About 370 days (wake up 10 times per day, 15 second every time) Type-C Cable Length 1.5m...
Wi-Fi amplifier. Contact us at support@acelerar.net for more advises if necessary. ⊲ When binding the device, if you can NOT hear a “Buugo” tone and the indicator light DOESN’T turn to blue (which mean the binding is NOT successful), please hold the reset...
Part 4 – Starting Using The Camera Now Let Start Using the Acelerar T1! 4.1 Download The "CloudEdge" App 1. Search "CloudEdge" on Apple Store (iOS) or Google Play (Android) to download the app. 2. Use the phone camera to scan the following QR code to download the "CloudEdge"...
4.3 Account Sign Up (On CloudEdge App) 1. Open the app and click Sign up. 2. Enter your email or phone number, click send verification code. 3. Get the verification code from your email or message, input it and set up the password 4.
STEP 11: A "Tips" window will show up, click "Enter" to read the tips or just cancel it. Now the Camera is Ready! If you still can’t bind the camera, please contact us at support@acelerar.net for more advises. 4.5 How To Use The App Press anywhere on the camera screen to enter the Live View.
* Insert Micro SD Card (not included) Tip: Video playback function requires a micro SD card inserted. Open the bottom micro SD Card slot cover. Insert a micro SD card 8G, 16G and 32G micro SD cards, the format must be FAT32.
Installation location selection: Please install the solar panel in the place with the longest sunshine time throughout the year. Acelerar solar panels only need a few hours of direct sunlight a day to provide sufficient power to Acelerar T1. The photoelectric conversion rate of solar panels is related to factors such as weather conditions, seasonal changes and geographic location.
Page 13
Camera Placement Do's & Don'ts For reducing false alarms, please note that: 1). Do not install the camera facing any objects with bright lights, including sunshine, bright lamp lights, etc. 2). Do not place the camera too close to a place where many vehicles move frequently;...
Page 16
1. Choose the device 2. Enter into multi-camera 3. Add a camera & multi- display interface viewing live page screen viewing 4. Live view button 5. Camera type icon 6. Camera name 8. Alarm information icon (red dot indicates alarm 7.
5.2 Settings Device Name: Change the device name. Receive Alert Notifications: Open it to receive the notifications. Device Share: Share the camera with the users who is registered in the same region. Device Information: Check to view 'Network Name' , 'Signal Strength' , 'Virtual ID' , 'IP' , 'Mac Address' and 'Time zone' .
(5) Alert Plan: Set the alarm time. (6) Audio warning and strobe light: On/off. Recording Management: Set up recording time check the SD card capacity. Cloud Storage Service: Activate the cloud storage service and check statues. Device Version: Check the current and the newest version.
5.4 P2P User Sharing 1. Please sign up a new account on your friend's phone. (the same steps as you created your account, please choose the same country) 2. Access your APP 'CloudEdge' , click 'Device Share' to choose the camera which you want to share, click ' A dd' then scan or input your friend's account to add his account.
5.5 Alert Settings PIR 'Motion Detection' is on by default and the default sensitivity is 'Low' . It’s adjustable. Alert settings steps: 'My Device' -> 'Motion Detection' Detection Sensitivity: The detecting distance is maximum 12 meters (39.3 ft) when select the detection sensitivity into 10.
5.6 Alert Push Notification And Playback Wireless camera with PIR sensor is not designed for 7X24 all day recording, but aims at pushing alarm message notification to app and recording video to MicroSD card- or capturing a screenshot to cloud (Need to pay) when PIR sensor detected human body motion events.
Part 6 – Battery Management ⊲ The camera has built-in batteries, which can be used for 4-6 months in theory, assuming the camera wakes up 10 times per day and watching 10minutes of video. (Note: The life of the battery depends on the times of the camera's wakeup. The more the times of wake-up, the faster the battery capacity is consumed.)
Part 8 – Trouble Shooting Description Solution and Operation Unable to connect (1) Check your Wi-Fi name and password. (2) Ensure your Wi-Fi is 2.4GHZ, not 5GHZ. (3) Ensure your camera and phone close to router (30-100cm). Reset succeed or not (1) Press and hold the reset button for 5 seconds.
We suggest you connect the camera to the solar panel. Acelerar solar panels only need a few hours of direct sunlight a day to provide sufficient power to Acelerar T1. Also, the wireless camera charger supports DC 5V 2A plug. It takes about 8 hours to fully charge.
Technical Support & Software Upgrade Service How to get our technical support 1. Starting a live chat at acelerar.net (Mon-Fri 8:00 am - 5:00 pm pst) 2. Emailing us at support@acelerar.net (reply in 12 working hours) 3. Submit an online form at acelerar.net/contact How to upgrade the software 1.