Assembling Procedures Parts List Check that you have all the parts for this model BEFORE assembling your product. Step 1 No tools required. A. 2 front wheels B. 2 rear wheels C. 6 safe rubbers D. Baby walker frame Front Side E.
Page 3
Step 4 Step 6 pulling Step 5 6. The belt under the seat is a dual safety measure just in order to protect the baby from falling to the ground if the seat not being fixed well .If this belt got loose,pls fix again according to the pictures above.
Page 4
Step 8 How to Change Walker to U Shape Step 10 8. Put the music toy board onto the groove on the upper tray, listen for 3 clicks to make sure it's installed firmly. DISASSEMBLY Step 11 Pull the ring of the music toy tray onward the seat,then pull up with certain strength to disassemble the music toy tray from the upper tray.
Page 5
Step 13 sure the lock rotated to 90 degrees.) How to Fold the Walker 13. If you want to keep your baby in walker,not going anywhere and have a small jumping game inside. You can assemble footrest on walker as below. insert the white hook of foot rest into the correspond- ing position, and make sure the hook fully across the positon hole and lock stably.
Page 6
The walker includes one electronic play tray and one toy set that attached to the walker frame. The function and use are shown here. Step 16 Rotate the kitty from left to right 360 degrees. Rotate the giraffe from up to down 360 degrees.
Need help?
Do you have a question about the BB5555 and is the answer not in the manual?
Questions and answers