Download Print this page

THEMIX SHOP Pasta Maker Instruction Manual

Pasta Maker

Instruction Manual

How to prepare the machine for use

Fix the machine onto the table with

the supplied clamp and insert the

handle into the roller hole (Fig. 1). To

clean the rollers pass a piece of dough

through several times then discard the

dough.

Find your favourite pasta recipe on

Cookidoo and create your dough.

Once complete place it onto a lightly

floured work space (fig 2). Cut it into

four portions.

Your machine has a width regulator.

Set the regulator to position 7 by

pulling it outwards and turning it

so that the two smooth rollers are

completely open (fig.3.) Pass a

piece of dough through the machine

turning the handle (fig.4). Repeat this

operation 2-3 times, reposition the

dough and adding some flour to the

middle of the mixture if necessary.

clamp

handle

Table of Contents

Do you have a question about the Pasta Maker and is the answer not in the manual?

Page 1 Pasta Maker Instruction Manual How to prepare the machine for use Fix the machine onto the table with the supplied clamp and insert the handle handle into the roller hole (Fig. 1). To clean the rollers pass a piece of dough...
Page 2 (min thickness at no. 1 is approximately 0.2mm). The pasta maker comes with 2 settings for cutting, one is for spaghetti, one is for fettucinni. Insert the handle in the chosen hole for the cutting rollers,...