Advertisement
W L A N
OEM USB Module Adapter
The OEM USB Module Adapter
is an adapter board designed for
easy interfacing the OEM Serial
Port Adapter products from
connectBlue.
The USB Module Adapter automatically installs itself as a virtual
COM port when connected to the computer. The Bluetooth stack or
WLAN software stack are incorporated in the connectBlue modules;
and therefore, no additional software is needed in the computer. The
OEM USB Module Adapter consists of:
• USB type A connector
• Connector for connectBlue Bluetooth or WLAN modules
• Restore Serial Settings switch
• Function switch for external connect
• Reset switch
• An RGB LED indicating module status
See the AT commands specification manual for the Serial Port
Adapters for further information about the functionalities.
WIRELESS INDUStRIAL SOLUtIONS
)))
Advertisement
Table of Contents
Summary of Contents for connectBlue OEM USB Module Adapter
- Page 1 COM port when connected to the computer. The Bluetooth stack or is an adapter board designed for WLAN software stack are incorporated in the connectBlue modules; easy interfacing the OEM Serial and therefore, no additional software is needed in the computer. The...
- Page 2 Printed in Sweden. ©2007 connectBlue AB. All rights reserved. All specifications are subject to change without notice. the Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by connectBlue is under license.
Need help?
Do you have a question about the OEM USB Module Adapter and is the answer not in the manual?
Questions and answers