Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CENNTRO METRO Series
Summary of Contents for CENNTRO METRO Series
- Page 1 METRO ELECTRIC TRUCK USER MANUAL...
- Page 2 1. Introduction This User Manual provides information about the vehicle you have purchased. You will find most of the information you need in this manual, which shall allow you Understand the functions of the vehicle, Use the vehicle most effectively Carry out simple maintenance of the vehicle With regards to main services and maintenance, please contact your authorized service centre.
- Page 3 Vehicle Plate Vehicle plate is located at the right-side door frame of the cabin. Vehicle Identification Number (VIN) VIN contains information about year of production, vehicle model number and serial number. VIN can be found. Engraved on the chassis, located below the driver seat Motor Plate Motor plate can be found on the top side of the motor Fill the following information after purchase:...
-
Page 4: Safety Information
2. Safety Safety information For your own safety, please read and understand all safety labels on this vehicle. All warning labels are placed at appropriate position of the vehicle. If the labels are not readable, faded or missing, please contact your authorized dealers to have them replaced. -
Page 5: Safe Driving
Weight Weights of passengers (driver + passenger) 130kg Weight of goods 500kg Safe driving Driver safety Do not carry goods exceeding 500 kg The structure of the cabin has no rollover protection, driver must prevent vehicle rollover Ensure there is no obstacle or people behind the vehicle when reversing. -
Page 6: Potential Risks
Weight of driver Weight of passenger All accessories carried by the driver and passenger Weight of all other accessories Goods in the vehicle Warning! Pay attention to all warning signs. Drive the vehicle under improper operation may result in out of control, collision, and rollover, which might result in serious injury or fatal. - Page 7 Overspeed Drive the vehicle at high speed may result in accident. Driver should drive at appropriate speed based on various road and traffic conditions, and visibility etc. Inappropriate turning of vehicle Inappropriate turning of vehicle may result in losing control and traction, accident or rollover. The driver should take all measures before turning.
- Page 8 Check with your authorized workshop if more information is required. Warning! Strictly forbit washing the vehicle during charging. Warning! Liquid/chemical leak from the batteries are highly corrosive. Avoid leaked liquid/chemical to come in-contact with skin and eyes.
- Page 9 3. Vehicle features and control Vehicle features and control overview 1. Lighting control switch 2. Wiper liquid control switch 3. Radio control switch 4. Instrument cluster 5. Storage area 6. Side air outlet 7. 12 V electric plug 8. Cup holder 9.
-
Page 10: Starting The Vehicle
Starting the vehicle Key to start the vehicle Make sure that the gear is in N gear and pull up the handbrake After inserting the key, turn it clockwise, the display will light up, and all electrical equipment can be used. Rotate the gear switch to select the gear Release the handbrake and push the accelerator pedal to start the vehicle. - Page 11 Warning! When a person leaves the car, please make sure that the reverse gear switch is in the N position and the handbrake is tightened Warning! Starting the car when charging is prohibited. First unplug the plug, then start the car ...
- Page 12 Rear fog lights indicator Front fog lights indicator High beam indicator Low beam indicator Left turn indicator Right turn indicator Daytime running lights indicator Total mileage driven Current motor speed High voltage battery current voltage Current output current of high voltage battery Current highest single battery voltage Current lowest cell voltage Speedometer...
- Page 13 Gear indicator Error code Brake light indicator Door indicator Battery failure indicator Vehicle communication failure indicator Motor overheating indicator ABS indicator Low voltage indicator ready indicator Percentage of current voltage If brake component or brake system fails, brake indicator lamp will light up Check the following items if brake indicator lamp light up Item in Brake System Possible solutions...
- Page 14 Hand Brake Hand brake rod is located between the two seats shown Hand brake applies brake on the front wheels. Pull hand brake by pulling control rod Release hand brake by pushing control rod and at the same time press button Warning! Must first release hand brake before driving, it will damage the vehicle if drive the vehicle with hand brake still engaged.
- Page 15 Cleaning of windscreen Open the front cover to access to the windscreen cleaning liquid container 1. Push down the front cover with fingers 2. Pull out the front cover Push the rod inwards to rotate wiper Move the rod towards driver to start wiper Regularly inspect level of liquid in the container, refill water.
-
Page 16: Drive System
4. Drive system Drive system 1. Drive motor 2. Drive motor controller 3. On-board charger 4. 1 KW DC/DC converter 5. Starter battery 6. Air conditioner compressor 7. Air conditioner condenser 8. PDU High Voltage Distribution box (HVDB) 9. On-board charger 10. -
Page 17: On-Board Battery Charger
Battery Battery Pack Battery pack in the vehicle provides energy require for the vehicle. To maintain optimize battery pack performance, it is best to completely charged the battery regularly. A good practise is to charge battery pack daily or after each use. Attention: Each battery pack has factory serial number. -
Page 18: Start Charging
Note: to be replaced by charging gung Start charging Select a charging place that can charge for long hours, ensure connection are safe. Switch ignition key to OFF or Pop up the one-key start button, and gear selector to N. One end of charger connects to the socket of the vehicle, and another end to home socket (110-230 V,16 A) or standard charge station. - Page 19 Warning! During batteries charging, do not carry out any electrical works on the vehicle or in the vicinity area. Warning! Disconnect the main supply before attempt to perform service and maintenance of battery pack, subsequently disconnect all other electric accessories (if any), then disconnect the negative terminal of the 12 V battery, finally disconnect the negative terminal of the battery pack.
-
Page 20: Rear Mirror
5. Comfort Door lock functions The vehicle is equipped with an electric lock, it is controllable through the locking system located on the left side door Lock door: Turn the key clockwise Open door: Turn the key anticlockwise The door will be automatically locked when the vehicle speed reaches 20 km/hr. Warning! The door structure does not provide adequate protection during accident. -
Page 21: Seat Adjustment
Seat Adjustment Seat can be adjusted forward or backward by pulling/pushing the rod (1) under the seat Safety belt To fasten safety belt The display will indicate “safety belt not fasten” sign when seated. Pull the safety belt across the body. Insert the belt tongue into the slot (1). -
Page 22: Other Equipment
6. Other equipment Air conditioner system (optional) Air conditioner is to provide heating and cool air. Its energy is supplied by the lithium battery pack. Use of air conditioner will reduce autonomy range. Heating operation: Press power switch button(6); select button(2) for heating;... - Page 23 12V socket Hazard lamp Hazard lamp can be turn-on even if the ignition is not switched on. Operation: 1.Press down hazard lamp as show in(1) 2. When the hazard lamp is in operation, the hazard lamp sign will display in the dashboard.
-
Page 24: Operation
7. Operation Inspection before driving Each time before driving, the driver should inspect the following items to ensure the vehicle is safe, otherwise, it might lead to risk of accident. Note Item Accelerator Ensure proper operation Brake system/brake peddle Ensure proper operation Brake fluid Ensure proper fluid level... - Page 25 Reverse Pay attention to the following before reversing the vehicle 1. Always ensure no people or obstacle behind the vehicle, always looks left and right to ensure safety 2. Reverse the vehicle slowly 3. Lightly tap the brake pedal, stop the vehicle 4.
-
Page 26: Repair And Maintenance
8. Repair and Maintenance Monthly maintenance Monthly maintenance Check battery voltage Check battery cables and terminals Check battery insulator for any sign of wear Check to ensure battery pack are secured Check tires for proper pressure and wear Check level of brake fluid Check brake hose, for sign of wear and leaks Check proper operation of safety belts Check indicator lamp, brake lamp, lightings, horn, turning signal, wiper... -
Page 27: Brake Maintenance
Brake maintenance Brake fluid Regularly inspect brake system and brake fluid level. Add brake fluid if the level is low. There are four hydraulic controlled disc brake in the vehicle. Brake fluid container is in the front end of the vehicle as shown. Check the height of fluid regularly. - Page 28 Steering column Check to ensure the steering is smooth and can rotate freely 1. Park the vehicle on a flat surface 2. Rotate steering wheel lightly, the steering should rotate lightly 3. Send the vehicle for service If the rotation is not smooth or if unusual noise is detected ...
- Page 29 Tire pressure Warning! Incorrect tire pressure could result in vehicle losing of control and cause accident, serious injury and fatal. Check tire pressure regularly once a day or before driving the vehicle. Follow the tire pressure recommended in this Manual. Tire thread Incorrect tire thread may result in bad balancing of vehicle.
- Page 30 Dismantling cover of indicator lamp Use fingers to press in the cover to release the snap pin as (1). Pressed the lower side of the lamp cover to release the snap pin below as (2) Dismantle lamp cover, dismantle lamp. Use TORX T30 screw driver to open 4 screws as shown in (3), remove head lamp.
-
Page 31: Battery Maintenance
Battery maintenance Warning! High voltage from battery pack may cause electrocution, unless you have been trained by qualified technician, do not attempt to work on battery pack. Warning! Battery cell and terminal of battery pack contains lead and other poisonous chemicals. Wash hands thoroughly if contact these components. - Page 32 Attention: if the battery is stored below O C, follow the instruction below. Battery storage item Storage period Charging procedures Less than 10 days Completely charged, park the vehicle, switch off supply. During this period, some batteries energy may be lost 10 days to 24 weeks Disconnect on-board charger.
-
Page 33: Specifications
9. Product specifications and Attachments Specifications Vehicle model number FD5024XXYBEV Total mass (kg) 1700 Unladen weight (kg) 1070 External dimensions 3910x1400x1905 Energy type Pure batteries Motor rated power/peak power 10 kW/24 kW Maximum speed (km/hr) Battery voltage 86.4V Battery capacity 300 AH Passengers (driver + passenger) Steering type... - Page 35 10. CAN Box connection instructions 1. CAN BOX terminal connection Yellow wire connected to H (CAN high) Green wire connects to L (CAN low) 2. Find the CAN bus under the copilot net pocket 3. Connection line 4.USB port connected to computer 5.
- Page 36 6.View information Change the language...