InFocus LP335 User Manual page 25

Standby
When you press
standby
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
"Standby Time" on page 24 for details.
If you press
•
standby
returns to normal operations immediately.
If you press
•
standby
60 second delay before the lamp turns back on.
If you don't press
•
minutes.
Volume (keypad only)
To increase the volume, press
ume, press
volume -
Volume adjustments are saved for each source you have con-
nected.
, the display and audio turn off and a
again within 15 minutes, the projector
again after 15 minutes, there is about a
again, the lamp turns off after 15
standby
volume +
.
.
To decrease the vol-
17