Gledopto Soposh Quick Manual

Thanks for buying our products.
In this manual we will explain the connection of wires and the connection with a ZigBee Light
Link Gateway.
These devices works with many ZigBee Light Link Gateways* like Philips Hue, Amazon Echo
Plus.
Installation:
1.Turn off the Power.
2.Plug in the Light.
3.Now you can connect it with the gateway.
Connection with Gateway:
1.Start the device searching on the ZigBee Light Link Gateway, switch on the led light,
it could take some time.
If the Gateway does not find the device, plug power off/on or make a reset and swich
off/on the hue bridge once.
2.The Gateway found your device and you can assign it to the different
rooms/zones/groups.
3.Now you can use the device.
Reset:
1.Switch on your device.
2.Now switch off and on within 2 seconds.
3.Repeat off/on four times.
4.Reset is done when the device is switched on in the fifth time and the light stays on after
blinking 4 times.
1sth on/off
on
off
within 2s
the 5th on
Outdoor light
blink
4 times on