HeatTrak WI-FI SMART OUTLET Instructions

STEP
STEP
Trouble Shooting Suggestions
Outdoor Safe
6
11
WI-FI SMART OUTLET
Signal Strength:
connection is poor, spotty or intermittent, this device may not connect or stay connected
to your device. For home locations in remote areas (i.e. a cabin in the woods), this device
DOWNLOAD
& INSTALL THE APP
might not be a suitable solution for you. If this is the case, email us and we'll offer to
exchange your Wi-Fi Plug for a wireless remote control switch. (HR-WIRELESS)
APPLE USERS: From the App
Store, search & download the
No Connection After 3 Attempts:
free app C-home (or Chome).
device might be defective. If you have purchased a new Wi-Fi plug and there was no light
ANDROID USERS: From the
illuminated in the center and you've tried resetting the device by holding down the center
Google Play Store, search &
button for 6-10 seconds, email us for additional troubleshooting or replacement options.
download the free app C home
(or Chome).
Router Frequency:
Not these apps.
receive data: a 2.4 GHz and 5 GHz. This device works best if your smart phone or tablet is
connected to the 2.4GHz frequency. If you're not sure which frequency your phone is
Google Chrome
Fast & Secure Web Browser
connected to, call your internet service provider and ask them to help you determine this
Select "Allow While
While the Wi-Fi Smart Plug
Using App"
is flashing red, select information. Unfortunately, this is not something we can assist with.
C_Home
"Confirm Indicator Rapidly
Productivity
Blink"
STEP
Warning
8
To reduce the risk of fire, electric shock or
STEP
personal injury, please strictly follow these
instructions.
3
1. To prevent water immersion, the outlet
If it doesn't connect after 3 attempts, see possible troubleshooting tips on the last page.
must be mounted in a vertical position at
least 2-feet above ground level with the
outlets facing downward. Do not immerse in
water.
2. Do not connect any devices which may
exceed the maximum 15 amp ratings of this
remote outlet.
3. Do not disassemble or attempt to repair this
product.
4. Children should not use remote outlets
without supervision.
5. This product and its packaging are not
intended to be used as toys and should be
You can move the Wi-Fi Smart Plug to the outside receptacle where you'll be using your HeatTrak kept away from children at all time.
6. Used batteries should be disposed of safely
and environmentally.
Snow & Ice Melting Mats. Plug in the HeatTrak Power Unit and Snow Mats to the Wi-Fi Smart Plug
WARNING
and you're ready to go!
This product can expose you to chemicals
Register by email or
including lead, which is known to the State of
California to cause cancer and birth defects or
mobile phone number.
other reproductive harm. For more information
NOTE: Phone registra-
RECOMMENDATION: To keep the smart plug in sync with your device, do not attempt to control the
go to www.P65Warnings.ca.gov. This product
meets and complies with all Federal regula-
tion is faster.
tions.
smart plug by manually pressing the button on the plug. You should only control the smart plug
FCC WARNINGS
from, your phone or tablet.
Warning: Changes or modifications to this unit
not expressly approved by the party responsi-
ble for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and
Select "Add Device"
Place the Wi-Fi Outlet and your smart phone or tablet
STEP
STEP
right next to your Internet Router, or as close as
7
12
possible. Make sure the Wi-Fi Outlet is plugged in.
(See picture below.)
For best results, there must be a strong Wi-Fi signal. If the
SKU: HR-WIFI
NOTE: You may have to use an extension cord to get
the Wi-Fi Outlet close to the router.)
STEP
1
Every Internet router has two frequencies to send and
Next, enter your Wi-Fi
Name and Password.
Select 2.4Ghz Network
(preferable). Press
"Continue".
STEP
found to comply with the limits for a Class B
9
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide STEP
NOTE: If it times out, go back to step 8 and try again.
reasonable protection against harmful
4
interference in a residential installation. This Add Manually
equipment generates, uses and can radiate
radio frequency energy and if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communi-
Socket
cations. However, there is no guarantee that
(Wi-Fi)
interference will not occur in a particular
CONGRATULATIONS!
installation. If this equipment does cause
harmful interference to radio or television
reception, where can be determined by turning
You are now set up.
the equipment off and on, the user is
encouraged to try to connect the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna
2. Increase the separation between the
equipment and receiver
3. Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected
4. Consult the dealer or an experienced
Select a password for
radio/TV technician for help
this device. NOTE:
Disclaimers
This is not your home
HeatTrak makes all attempts in providing
accurate information on all media. However,
internet password.
HeatTrak makes no warranty as to the accuracy
of the information, including representations
and warranties about the accuracy of the
product specifications, marketing material,
product availability, new product launch dates
and all other content herein. HeatTrak reserves
the right to update and change information
ENJOY YOUR SNOW DAY.
without prior notice. All information provided is
Select "Add Manually".
Select "Socket (Wi-Fi)"
You will need to know your
IMPORTANT:
wi-fi network name and password for this
setup process. Make sure to write it down
before you start so you have it ready to
enter when the app asks you for it.
In a small percentage of cases, the
C-home
Utilities
provided 'AS IS' with all faults without warranty
of any kind – either expressed or implied.
HeatTrak and its suppliers disclaim all
warranties, expressed or implied without
limitations. HeatTrak and its suppliers shall not
be liable for any indirect, special, consequential
or incidental damage including, without
limitation, post profits or revenues, cost of
replacement goods, loss of damage to data
arising out of the use or inability to use any
HeatTrak product, damages resulting from use
of or reliance on information present, even
with prior notice to HeatTrak. All non-HeatTrak
trademarks, logos, brands and products are
trademarks or registered trademarks of their
respective owners. HeatTrak does not claim
any relation. Mention of non-HeatTrak
products and brands are for information
purposes only and does not constitute an
endorsement or affiliation.
Warranty Period:
HeatTrak Limited Warranty is for two (2) years
from the date or purchase for new products. In
the event that you have a problem with this
product, please contact us at:
HeatTrak, LLC
Support: (888) 586-4904
Email: info@heattrak.com
Website: www.heattrak.com
STEP
13
STEP
2
Wait for connection to
reach 100%. Click Done.
If prompted to "Update"
select yes.
Press and hold the
STEP
center button on the
10
Wi-Fi Smart Outlet
STEP
5
for 6 seconds, or
until the center
button on the outlet
blinks red.