IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS. 2. Do not touch hot surfaces. Use handles or knobs. Use oven mitts or potholders. 3. To protect against electrical shock, do not immerse cord or plugs or temperature control probe in water or other liquid.
malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. 8. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. 9. Do not use outdoors. 10.
Page 6
CAUTION HOT SURFACES: This appliance generates heat and escaping steam during use. Proper precautions must be taken to prevent the risk of burns, fires or other injury to persons or damage to property. CAUTION: This appliance is hot during operation and retains heat for some time after turning OFF.
Page 7
Plasticize Warning CAUTION: To prevent Plasticize from migrat- ing to the finish of the counter top or table top or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken;...
Page 8
5. To clean the temperature control probe, simply wipe down with a soft, damp cloth. Make sure you dry it thoroughly before using again. NOTE: The temperature control probe is not submersible. CAUTION: Use the temperature control probe supplied with this Griddle only. The use of any other temperature control probe may cause fire, electric shock, or injury.
Page 9
4. Before cooking in the Griddle for the first time, wash the non-stick Griddle in mild dishwashing soap, wipe and allow to dry. NOTE: The Griddle (without the temperature control probe) is dishwasher safe. 5. Insert drip tray into rails under the Griddle’s side, positioned directly under the grease drain.
Page 10
4. Remove stubborn stains with a plastic scouring pad and mild dish washing liquid; DO NOT USE STEEL WOOL. Operating Instructions 1. Turn temperature control probe to the OFF position. 2. Plug the temperature control probe securely into Griddle’s control probe socket. 3.
Page 11
to check the drip tray to make sure it is not full. Remove drip tray; empty contents and wash if needed. See the Time/ Temperature Chart for basic suggested cooking information. 6. When cooking has been completed, turn the temperature control to the OFF position. The indicator light on the temperature control probe will turn off.
Need help?
Do you have a question about the BN03 and is the answer not in the manual?
Questions and answers