Watt Plastics Picket Fence Installation Instructions PICKET FENCE PART LIST EACH 3’, 4’ & 5’ HIGH OPEN PICKET PANEL INCLUDES: A. 2” X 3 1/2” Routed Rails (2) B. 7/8” X 3” Pickets (15 for 8ft width, 11 for 6ft width) C.
Page 3
Watt Plastics Picket Fence Installation Instructions PREPARE FENCE LAYOUT Please read this instruction sheet completely before starting work. Laying out the fence is an important first step toward a quality installation. STEP 1 Locate the boundary lines to your property.
Page 4
Watt Plastics Picket Fence Installation Instructions SETTING POSTS STEP 1 Dig holes 8”-10” in diameter and anywhere from 24”, 30” or 36” deep depending on your local weather and soil condi ons. STEP 2 Posi on the post in the hole. The post should be...
Page 5
Watt Plastics Picket Fence Installation Instructions FENCE ASSEMBLY - PICKETS STEP 1 Slide pickets down through top rail and lock into bottom rail. NOTE: All picket caps are pre-glued at supplier’s factory POST CAPS Apply pvc glue to the inside of the cap and press completely onto the top of the post.