Summary of Contents for Perthold Engineering CatTraq Live
- Page 1 CatTraQ Live User Manual Revision History Revision Change V1.0 Initial version V1.1 Note about “+” character in commands...
- Page 2 CatTraQ Live Perthold Engineering LLC 216 Northridge Drive GPS Tracker Anderson, SC 29621, USA Overview The purpose of this device is to determine its position using GPS satellite signals and sending the position automatically or on call using existing GSM/cellular phone networks.
- Page 3 CatTraQ Live Perthold Engineering LLC 216 Northridge Drive GPS Tracker Anderson, SC 29621, USA Specifications Dimensions 64mm x 46mm x 17mm (1.8”*2.5”*0.65”) Weight GSM/GPRS Network Band 850/900/1800/1900Mhz GPS chip SiRF3 GPS sensitivity -159dBm GPS accuracy Time To First Fix Cold start: 45s, Warm start: 35s, Hot start: 1s...
- Page 4 CatTraQ Live Perthold Engineering LLC 216 Northridge Drive GPS Tracker Anderson, SC 29621, USA 2. Push the slide along and turn it left. 3. Put the SIM card into the holder and turn the slide right and fasten it in place.
- Page 5 CatTraQ Live Perthold Engineering LLC 216 Northridge Drive GPS Tracker Anderson, SC 29621, USA Turn on the unit outdoors by pressing the “on/off” button until the indicator light is on. For first use, please initialize the unit and restore it to default setting (please refer to next section for instructions).
- Page 6 CatTraQ Live Perthold Engineering LLC 216 Northridge Drive GPS Tracker Anderson, SC 29621, USA Realtime Position Request If there is no authorized number set then any number that calls the tracker will receive a position info. If there is already an authorized number set then it will not respond to a call of an unauthorized number.
- Page 7 CatTraQ Live Perthold Engineering LLC 216 Northridge Drive GPS Tracker Anderson, SC 29621, USA To switch back to the tracking mode send a SMS “tracker+password” to the tracker, it will reply “tracker ok!” and switch back to “track” mode. Geo-Fence This restricts the movement to a defined area.
- Page 8 Check if the authorized number is setup or in the coverage of signals. Location reports zeros: GPS signal reception is too weak, no position determined. This happens sometimes if the unit is indoors. © 2007-2009 Perthold Engineering LLC Mail: support@mr-lee-catcam.de Page 8/8...